Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have a M931 that I recovered out of Mississippi 3 yrs ago. It has been a real good running truck up until yesterday. I hooked up to the flatbed and loaded my JD 4430 tractor up and pulled it about 100 miles (to Reb87's place). After unloading the tractor I went down the road to unhook the...
I have to move my generator outside for a few weeks. Will it be ok outside in the elements?? I plan on throwing a tarp on it when I get back up to the farm next weekend. I assume they are built to withstand more than a dry Nebraska winter.
Thanks for the info!
I have a M931 that came out of Camp Shelby. I was disappointed with the performance of the truck. I had it almost a year before I finally decided to take it in to the shop. It would fall flat on any kind of a hill and when in neutral the rpm's were very slow to increase when the throttle was...
I was trucking down the road the other day in my M931 to pick up a John Deere 4430 tractor that I had purchased and all of a sudden it started to stink something terrible in the cab. I looked down at the gages and noticed the alternator needle was up in the red zone. I looked under the seat...
I have a M931 with the 250 Cummins in it. It has warmed up on me a few times. The coolant level is up and the belts are good and tight. I did not think the fan was kicking on so I installed the two bolts to lock the clutch up so it now runs all the time but still gets hot...
Just wondering...
I know my M 931 is the same way. I was bringing home seed and fertilizer the other day and I was down in first going up some of the larger hills.
I spoke to several shops about my lack of power and was referred to a diesel shop that has been around for a lot of years. I spoke to them and...
So it is 1/8" pipe that will screw into the axle housing? I took the vent plug out of my 931 rear axle because of this same problem. Every time I took the check plug out the diff was pressurized, and oil is leaking out the front pinion seal.
Sealed bid on GL. I bid on three of them hoping to get one. The one I didnt win had a ~ $5000 bid on it.
I really liked the fact that my wife or brother can help me haul this fall because of the auto trans and low range. I am the only one with a Class A CDL.
We drove about 8 hrs on Sunday and then 18.5 hrs on Monday. We drove in snow/sleet and freezing fog for the last 8 hrs on Monday. We should have had extra windshield wipers with us because the ones on the truck were pretty dried out. My brother was following in the Pickup and tried several...
We farm and will put a small grain trailer behind one of them. I thought they would be great for hauling grain from the field to bin, or town since it is about 12 miles of gravel road to town.
I would also like to get a flatbed of some kind. Maybe a 871??
This is my first post here and just wanted to say hi to everyone. We just got two M931's home from Camp Shelby on Monday. We could not have done it with out all the information that we collected from you all. I just wanted to thank a few members who helped us out on this trip.
Reb 87 has...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!