Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
My m1009 hasn't been started in 2-3 years, if I pour fuel down the "carb" it will run til thats gone and thats it. I guessing its the IP but I hate to replace it since I'm selling it. Any thoughts or easy fixes?
I’ve got a m1009 with the two battery/two alternator setup. I run a inverter for my work but the 12volt side can’t/doesn’t put out enough juice for most of my needs.
So my question is will the following work.
Make my truck variable voltage by building a “switch, see below” that connects the...
Sampy: Thanks for responding.
I put in a lift-pump a month or so ago which just about fixed my problem. It now starts great when it's primed. But when it sits for a while “like overnight” it fires right up but then dies in a just a few seconds. Then I would have to crank way to long until it...
I had a similar problem and it seemed to fix itself when I separated and re-connected the inside part of the fuse box with outside part. Re-seating all the terminals inside.
PS I've inadvertently hit my Black-out switch which "at least the first couple times" caused a second or two of panic...
Popping my posting cherry here, bear with me please.
I've looked the forums/posts over pretty well and I've used the maintenance manual so much in the past 6 months that if it were paper I'd need a new copy, but I can't seem to find this addressed any where,
I'm losing prime in my 86 6.2...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!