Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
air filter new , does not have restriction gauge , cleaned egr was not carbon up
ordered a new map sensor # 12569241 oem part .
will post result as soon i receive map sensor thanks for reply
does any one have a diagram for ign on off switch with wire numbers and thier location on rear of switch
old switch was removed and location list was lost, should have taken a picture
lokked at tm does not state numbers
thanks
Terry
m37b1 sgteering wheel change
used a steering from a m151a2 which is about 15 inches and shaped in upward angle.
the jeep steering wheel had to be bored out to approx 20.7 mm and then pressed fit
on to m37 colum shaft
before installing wheel i placed a brass washer which is size you can use as...
thanks for heads up // im looking at steering wheel of my m151a2 its smaller and is molded in upward direction would be perfect , will work on removing and try to see if it would work on m37,, might have to do some modification
ill takes some picks when i check.
also does anyone of a good...
m37 smaller steering wheel
thanks for info will go to scrap yard pick up a s10 steering wheel and try it
i did install power steering from snake river works great found correct fan belt to use with set up it is# daybx552 it is agricultural belt made by thermold select
bx52 guess 52...
does any one know if a m151a2 steering wheel can be retrofited to a dodge m37b1 , this would give more leg room for left leg to depress clutch , or any other smaller wheel such as a 15 : wheel truck now has power steering conversion
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!