• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 86humv

    Humvee M1123 windshield glass

    Military non suppl glass is plastic on the inside and about 3/8 th inch thick. H1 glass is glass on both sides, and 1/4 inch.
  2. 86humv

    Headlight wires.. Which one does what.

    17 is high
  3. 86humv

    Correct Antennas for a M1046a

    Antenna for the Tow Hmmwv that is mounted on the right sponson would be: AS-3916/VRC
  4. 86humv

    200amp Dual Voltage 28/14v Alternator with 12v Accessories Question

    .
  5. 86humv

    list on components in VIC-3 intercom set

    Thats the proper ones.
  6. 86humv

    M 998 Electrical COVID??

    If you have a Key switch...they go bad all the time....put a stock start switch in.
  7. 86humv

    Rear Radius Rod

    The shorter tube works with the Moog tie rod ends for trucks with 12k hubs which have different steering arm covers.
  8. 86humv

    Rear fender condenser to Red Dot install thread

    2 condensers are for the 4 man A/C. If using a redot system...you can run one condenser....most people used the right one. On a M1152 with 2 man A/C, they only use the right condenser....a blocking plate is on the left.
  9. 86humv

    A2 M1123 - Troubleshooting Stop Lamp Switch

    Power from light switch goes into turn switch at pin D and comes out to brake lights at pin c So...switch has to be connected.
  10. 86humv

    24 bolt wheel bolts?

    Same thing
  11. 86humv

    12K half shafts, all the same?

    Thats my photo up there.
  12. 86humv

    A2 M1123 - Troubleshooting Stop Lamp Switch

    Those brake switches go bad internally..[ contacts ]... The 1123 has the dual switch...mech. connected together...one for trans, one for brake. I took some apart, and the brake side was bad internally...spring broke, and it flopped around.
  13. 86humv

    Slant Back Roof Leaks

    Rear hatch seal is 12339595 for steel rear hatch 12480634 rear seal on flee bay is cheap, but only for thicker aluminum hatch.
  14. 86humv

    Stuck Fan Clutch

    Don't whack the nose cone...it will break.....Add 90 psi air to the hose going to clutch....and whack body only.
  15. 86humv

    Windshield Frame

    With mine...you lay roof on and add front brackets { outer ones } with all hardware to get location...mark 3 hole from each bracket....take off hardware, and drill holes on inner layer only and add rivnuts.
  16. 86humv

    Alternator pulley education

    Disconnect regulator before welding
  17. 86humv

    Alternator pulley education

    I have new ones available if yours don't come off.
  18. 86humv

    What goes here?!

    There 13 bucks at Macmotors
  19. 86humv

    Brush Guard Bracket

    Here is a 9k plate...brackets circled in blue are used without winch. Brackets circled in red are to extend out for a winch.
  20. 86humv

    Brush Guard Bracket

    Those are one of the 2 types for mounting on a 9k winch plate.
110,879members
165,314threads
2,326,214posts
2,031online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks