Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Does anyone know how to remove heater cover, I need to see if I am getting power to the switch and check fan motor, circuit breaker is good, took out all screws on cover, removed small Allen head in fan knob. I cannot figure out how to get the cover past the other 3 knobs. There are no Allen...
Thank everyone for there information, took the brake canister off the matching trailer and used the internal parts matching the threads off the one I took off. New tire and no air leaks back on the road. I'm going to look into the part get the trailer back on the road. Again thanks.
Sent from...
I have a matching trailer, and I took part out of it. I believe all it is all good. Tire is getting installed tomorrow. Wish me luck. Found a part # on broken part.
Sent from my SM-S908U using Tapatalk
The new one came with everything, this is the piece the end fits into to the brake side, I bent the old housing, and it broke off 1/4 inch of the part that goes into the brake caliper side it has two rollers on the end. So it's the engagement part between the air canister and the brake system...
Does anyone know where I can purchase this rod assembly for my m1083 6x6? I purchased the new brake air chamber this is for the rear axle drivers side, I thought it would come with it, it did not, this is the piece that goes between air chamber and the brake caliper to ingauge. Air chamber...
That is what I want, found the whole system on ebay, 4800.00, only have to run the ac lines, hi pressure, and low pressure. But it comes with the end connectors.
Sent from my SM-G986U using Tapatalk
Thanks for that information, I purchased 2 pallets of sound deadening covers, I thought it was stick on, but it's thicker than expected I was expecting to put it in the truck. but end up purchasing something newer so if you know somebody that needs it have 2 pallets of it they are 40 by 40 x 48...
I want to put air conditioning in my 1998 m1083 6x6, what is the best option? Gen 2 upgrade running off the motor, or a back unit 24 volt, I only have heat now.
I live in Texas, we Run spicer here, most of the parts houses have them, napa.com, always our go too. you can get everything from them. Blue spicer we use up to 400hp, purple 400+ hp. We do alot of muddy here. Hope this helps. The other brands are new to me. I am going to check them out.
Sent...
Meritor, I am not familiar with, I have always run spicer, I even have updated driver train in my polaris 1000 rzr to Spicer u joints,
Sent from my SM-G986U using Tapatalk
Thanks for the update. Leaving 110 amp alt, Question is now, 2 d8 batteries our is thealthough, better battery option.
Sent from my SM-G986U using Tapatalk
Thanks for the info. Alternator is still working just though will I was doing all the changes see if there was a better option. Looks like not a good idea. I am just going to put new batteries in. Thanks Ronmar for the response. So is putting to d8 batteries in is ok, our is there a better...
I am wanting change out the 4 batteries on my m1083a1, to a two battery set up. Should I put in 2 d8's, our is there a better option. Also, should I upgrade to a260 vole alternator
Sent from my SM-G986U using Tapatalk
Thank you for the response. That was great information. I did get it to start. I put it inside so I can work on it. Going to take your advise, and put 2 batteries in. And take it the 4. Now I have to figure out the right two batteries to put in. I going to start this weekend
Sent from my...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!