• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Ggping

    Fuel filter replacement

    Ok I want to replace my fuel filter to a spin on filter…I have searched and read a few post but I want to retain the fuel heater and water in fuel sensor. The GF647 is extinct. Can anyone else recommend something similar?
  2. Ggping

    Interesting issue!?!?!?

    I pulled my glow plug card. I dunno look ok but who knows. Curious though, I’m wondering if something in the ignition switch burnt since that supplies power to the glow plug card. I think that’s how it works I dunno.
  3. Ggping

    Interesting issue!?!?!?

    Ya I have not added any grounds. Probably should add a few lol…ok I will see if the manual glow plug button still work when it cools down. Thank you I will look into the relay and see
  4. Ggping

    Interesting issue!?!?!?

    The buzzing was not coming from the radio it was coming from somewhere under the truck or even maybe the engine compartment and then something popped and now my way to start light does not come on Checked bulb that is good. I run a manual glow plug button, so I’m not sure it really matters. Just...
  5. Ggping

    Interesting issue!?!?!?

    So today I installed my Kenwood TK-7150 2 way for comms in my M1008 I’m with the local fire department and I volunteered to install comms. Has its own fuse block ran straight to the battery with a 12v switch and high amp relay. Radio turns on no issues there, however when I transmitted an odd...
  6. Ggping

    Belt tighten sequence

    Anyone have a thexton or two they want to sell?
  7. Ggping

    Belt tighten sequence

    I know I have seen it on the forum somewhere but I cant find it. I’m looking for the sequence to tighten the belts. Power steering/driver side alt/passenger side alt?
  8. Ggping

    Coolant issue!!

    Thank you…I dunno I seem the have a motor that self heals. No more leaking. I literally have done nothing yet. I checked to make sure fluids are good and everything is full. I get good coolant circulation . Even the radiator has stopped leaking…so ya. But I do have all parts to fix which I...
  9. Ggping

    Voltmeter issues after changing belts

    Well I may have spoke to soon…as I was leaving the store it shot right back up to 29. Checked batteries again and still showing 14.07 on front battery and 14.77 on rear. 28.8 across both batteries
  10. Ggping

    Voltmeter issues after changing belts

    Ok so my batteries needed a little charge took it for a little cruse this morning. And I was surprised to see this.
  11. Ggping

    CUCV Radiator Replacement

    Can you direct message me? I would be interested
  12. Ggping

    Coolant issue!!

    Yes I will definitely look at that. Just sort of an update. Drove the rig around yesterday nice and warm pulled into garage. Let this thing sit and cool down. And well didn’t leak…coolant is full. Reservoir tank at proper lever. This make absolutely no sense. as far as the weep hole. Where is...
  13. Ggping

    CUCV Radiator Replacement

    I have looked at auto zone but unfortunately nothing is available. I have only been able to find jegs reproduction ones. Also just found that jegs has brass and copper ones also
  14. Ggping

    CUCV Radiator Replacement

    Ya that’s the same location sorry I thought I added a picture and link
  15. Ggping

    Voltmeter issues after changing belts

    Unfortunately the only way to do that is to have it shipped out to a company that does it. The cost on a new radiator may be the best route found this
  16. Ggping

    CUCV Radiator Replacement

    Anyone have experience with this radiator? Reproduction Aluminum Radiator for 1982-1986 Chevrolet & GMC Trucks w/6.2L Detroit Diesel Engine
  17. Ggping

    Voltmeter issues after changing belts

    Exactly..that’s what I’m running into. So trying to find a radiator that will work without too much changing. But I will save that for another post.
  18. Ggping

    Voltmeter issues after changing belts

    ya I’m kind of a worry wort and try to get things to read or work properly so there is no question as to what working and what’s not. I probably should be replacing the batteries after I figure out where this coolant leak is coming from. I fear a water pump is in order and the possibility of a...
  19. Ggping

    Coolant issue!!

    Ran it drove it and still can’t see where it is coming from. DANG IT!!!
  20. Ggping

    Voltmeter issues after changing belts

    Ya I’m not a wiring guy or and electrical guy. So this 24volt throws me. Ok so I’m getting 28.8. So gauge reads a little high no horrible
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks