Search results

Tools and family are forever. Wives can be replaced

We used to take out low hanging lines all the time in one area.

What is your governed RPM. This will determine where the shift points are supposed to be. After the truck is up to operating temperature. This is the beginning of the allison road test. Place the transmission in neutral with parking brake set. Put the throttle to the floor and hold for 15...

If you are going to do the headlights and cab clearance lights you also need to do the bed marker lights and dot tape.

With commercial tags the dot regulations apply and you are required to make all of your lights comply to current standards.

How is it registered?

I have 10 medical chests that need to be picked up and shipped, no great rush on the shipping, to CA near LA or AZ or Las Vegas.

I went to flux core wire feeder 25 years ago and have never looked back. It is like having a never ending Rod. I prefer the Lincoln wire over the generic.

208 volts is generally three phase, but with ac being what it is there is some variance on the measuring method. What is the nema number on the plug?

Disc brakes are only now being used on 18 wheelers. I do not understand this fascination with disc brakes. Drum brakes do work great when they are properly adjusted and in good condition. I do like s cam brakes over wedge brakes.

The littlefield one sold for $46,000 http://www.auctionsamerica.com/events/feature-lots.cfm?SaleCode=LC14&ID=r0038&Order=price&feature=&collection=&grouping=&category=

This posters truck may have passed the COLA test. It is sad that the hole CDL testing does not address draining the air tanks. At least in California. This posters truck probably has three issues. The first issue is the air dryer is plugged and needs to be serviced. This has allowed water...

First time? Go back to CDL school It is supposed to be done daily

Pull the strainer and look at what is in the tank. You might be suprised what you find.

The picture shows the pintle mounted to a plate that is mounted to the machine You can always just put the ball through the lunette eye and move the trailer that way

Not all I have one that was built by another company

In order to understand that they would have to be able to read English.

A M135 should not have top loaders in it. What transmission are you planning? You have not explained why you want to lower the truck 6"

What truck do you have? The title says M35A3 then you mention the M135, a completely different truck, then you mention a cummins or cat, the M35A3 has a cat, then you say it is a 1953. Very confusing. In the long run you would be better off getting the right truck than trying to make this...

It should be on the plate passenger side of the dash