Search results

Hey Papabear if you need me I'll try again , but save mine till last and give some others a shot at it.

Watch it!! It's talk like that , that gets you put in charge of the TM section for life:wink:.

With 13 trucks plus trailers I never need an excuse , I just need to find the $$$$ to work on them:p.

The tree is gone I'll get a pic of the stump later today, it was not that big lucky for me.

A friend came over yesterday to cut down some dead trees for fire wood. Well one fell the wrong way and got stuck in another tree. No big deal hook a strap to the bottom and give a little pull right. You would think. Murphy most have been in NWA yesterday. Hooked up the M809 to the bottom of the...

I'll take the help. It's looking like I will be by myself this year. I'm going to open mine up next weekend too go thought stuff and check on stuff. I know I need to change out some MBU's. And just do some PMCS'ing.

I seen some 8X8's that had 2 straight axles , instead of steer axles , in the front. They turned like a wagon in front. These were from the 50's.?. Any one know anything about them?

The -35 is an older version of the 9-2815-210 manual. The -34's are from the 80's and is a "new" style. I like to look thought all the different years of the same TM's just too see what they added or took away.

That will buff right out!!:-P

Going to need a GOOD head count by the 25th so I know how much to cook for breakfast Saturday. I don't want to feed the wild life this year:confused:

My thinking is the 14451 cups on the new piston should work. The 14451 cups on the old two piece piston get expanded too much , in my opinion. I was also thinking about getting some other cylinders (for the pistons) or just pistons to put in my cylinders that use the cup type cups instead of the...

Here this should help you some. http://www.steelsoldiers.com/showthread.php?144042-M548-TM-s&p=1761077#post1761077

Here's all the TM's for the M548's

One thing I just thought of the 14451 cups are 1 1/4" and the 15306 cylinders are 1 3/8".

I have too go , I've got the MKT and have to make breakfast Saturday. I think the 14451 cups would work with the one piece.

I just checked they are 14451's. Are you go to the KAMO rally next month???

Just checked Oreilys has these in there brake best brand for 42.99.

What napa cups are you using? One of my trailers use the wheel cylinder as the GMC. I rebuilt them with cups from napa and they are so tight after sitting for a few months (with dot 5)I had to pound them out. They would not move other wise. I'm watching this to see what you find out.

I don't know if it would be or not. The -20 has 3 books -20-1 , 20-2 and 20-3. There is also a -34. All of these are avable for down load. If they are not on here let me know and I'll upload them for you.

My dad did 2 tours there during the war. And my nephew is there now.