Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have a MEP-003A that isn't charging the batteries. According to the testing article here (and TB) I have a bad regulator. I also had a open stator which has recently been replace.
After stator replacment, I'm getting 56v AC between the two stator wires while it's running (and wires...
I'm working on a lower cost auto-start for my 003a. From looking at the manuals (and the wiring diagram of the autostart kits) I have the wire location (terminal blocks locations) that need to be connected up.
The one thing I don't have figured out just yet is how the generator is powered off...
One of my two regular fuel pumps isn't working. I took it apart to clean and it has a broken part. Is there a source for a rebuilt kit for these? I've got one working and the transfer pump works as well but would like to keep my transfer pump for a future project. I've seen several 24v...
I'm in the process of replacing my CVT1 and linear transformer. This means lots of wires flying everywhere. I labled the wiring as I took it off but I'm also double checking the wires against the wiring diagram. I'm sure this is a stupid question but what does it mean when there are two numbers...
I've had my MEP-003A running producing voltage until tonight. I noticed a few days ago it was slow to turn over so I checked the batteries and they were low. I disconnected them and changed them one at a time. I hooked it all back up and started as it should. I ran it to begin troubleshooting...
I just picked up a 003A from a local municipality today. This gen had apparently been donated a few years back from someone in the community. I'm told it ran when it was donated but the local muni didn't follow through with its plans for a power source and thus decided to sell it. No one from...
I just purchased a MEP-003A at goverment auction that was used by previous owners in emergency managment department. Is like to use this generator for a whole home backup and have started looking at Automatic Transfer Switches. Ultimately I want it to automatically start, transfer, transfer back...