Search results

We have a growing presence in FL Panhandle, about 5 owners just in Navarre, a potential former Marine in Pensacola wanting my 1994 M1097A1 then you boys in Alabama. Trying to get my OIF1 5SFG GMV roadworthy and safe for one of the meets at the USS Alabama in Mobile.

Only call me Sir if you spell it C-U-R. And you have to get comfortable with reading the Parts TMs, myself I have digital and hard copies, my brain can find stuff faster in the analog method vs the PDF format. That Supplemental Fording Exhaust, I don't know whether the Amberlamps had a...

TM 9-2320-280-24P-2 Figure 401 Supplemental Deep Water Fording Kit Item 13 Part# 12342565 Pipe, Exhaust, Part of Kit P/N 5705703 UOC: A15 (M997A1) B15 (M997A2) H15 (M997) Equipment Parts Sales $425...

https://www.bretonindustries.com/breton-military-store/ Breton Industries is one of the OEM manufacturers for the soft top kits, doors and other military vinyl products:

That shorter fording exhaust is meant for the HMMWV Front Line Ambulance variant, per the -24P. If you do a search for the Part # there are 2 sellers with them in stock.

Did they go mammaries vertical?

These are the mount brackets I bought for my A2 tubular brush guard: https://www.ebay.com/itm/HMMWV-Humvee-M998-Brushgaurd-Brackets-Shipping-Included-Sale-Price/124210224182?hash=item1ceb819c36:g:H5EAAOSwtLxbfhSD

Those LH and RH Brackets attach to the doorway and C Pillar by Item 29 Part B1821BH031F113N 4each 5/16-24x 1 1/8" and Item 24 Part CR3243-6-5 8each Blind Rivets. You can google search those Part #s to get the exact specs for that hardware.

Yep, 6.2l, I usually go by the coolant crossover pipe to tell between 6.2l and 6.5l (not my original photo)

You can patch that roof with the correct 2 part cement (adhesive and accellerator) plus some loose sheet of the same material. There are different types of cement for PVC and Hypalon fabric (from working on Zodiacs), I believe the US issue ragtops are a PVC base. There is a single component...

Pop the hood for some photos, it could have the original 6.2l NA or got a newer 6.5l NA (Detuned) during overhaul, the water crossover at the engine front will tell you which. It doesn't say "in accordance with IROAN (Inspect, Repair Only As Necessary)" so may have very well received a...

Those 13 look like they were all one side, the curb side, but at least they answer a lot of questions and would allow them to be reproduced in mirror image. Sheesh, $1000+ each, for one side before fees and markup.

Humkini Stowage/C Pillar Stability: Figure 321 Item 25 Parts 12447124-1 and 12447123-1 Bracket, Mounting LH and RH, help stabilize the soft top C Pillar. What do you think about rolling up the Humkini top around the windshield strip, and use a couple of cinch straps attached to C Pillar with...

The VW/Audi Type 183 Iltis 1/4ton had a vinyl top that secured to the windshield frame by two latches attached to the windshield frame and the latch hooks attached to a 1" square bar set inside a pocket at the front edge of the vinyl roof. Same style system is used to install the Amtech helmet...

What do you think about sizing the ring to use the silver or black aluminum HMMWV M1025 turret bearings? I see a couple different LSV variant M1161s, different superstructure over the back deck. Use the bottom side rails welded to the diamond plate as the roadmap for the top side rails, as...

That is just a newer, clean Engine Electrical Start System controller box Part#12469158-1, the more recent Smart Start controller is Part #12480779 NSN6110-01-542-7901 . S3 Smart Start began to be issued starting with HMMWV Serial Number 255269

Rob R is somewhat close to you, he gets 6.5l GEP-Ts from time to time, Let him know what you seek and he will keep you in the loop when he gets stuff in. The long block I got from him came with the engine harness that just needed some end fittings replaced and one splice done, the 4L80E and...

How far are you from FL state line? I've got the engine sling, air over hydraulic cherry picker etc here just not the brawn to use it. I'm trading some unused stuff to a Pensacola FD/ALARNGman former Light Wheeled Vehicle Mechanic to have one of my GMVs upgraded with a 6.5l GEP-T. I regret...

Speaking of which, is there a trick or preferred method to unbolting the curbside engine mount to block bolts?

NP242 are rebuilt all the time, just buy a rebuild kit, the specific parts you broke, or pay a shop to rebuild it, install new seals (that tend to eventually leak anyway) Here at the bottom are a couple rebuild kit options for early and late H1...