Search results

I'd like to go, but it would be more drive time than rally time for me. 50 mph in the M1078 all the way there will take a while. Hmm.

I have been messaging back and forth with FarmingSmallKubota, and he has a bunch of machines with multiple problems that he's going through at one time. I think he was just trying to post similar problems in similar threads to avoid duplicates, not confuse anyone... though, I can see how it...

Glad it was helpful. That is why I make the videos. Forums are great. Pictures are worth a thousand words. Videos are millions of pictures. :)

Someone on another website shared this thread with me. I was hoping to get SOME of the function for my TRI to work with the mount, but I guess not. At least it will charge the battery and hold it while looking authentic. I guess the best I can hope for is the gut the inside of the mount and...

It's not to late, reach out to me via PM. Sorry on the late response. I was away on a road trip.

I took as much of the pump apart from the top as I could and let the ATF soak in there and put heat in there as well as well as around it to help the ATF really get in there. It took doing it a few times a day over 3 days or so to get it to finally loosen up enough. Feels like this was kind of a...

I didn't plan to rebuild them, just replace the outer portion of the chambers since they are old. I don't want to mess with opening up the spring side of the can. I just like the idea of having most of it be new and not worrying about it. Maybe I will rebuild one or two of the ones I take off as...

Had my first breakdown with the truck when I took it out to my off-grid place over the Memorial Day weekend. Glad it was on the way home so I still got to enjoy it. Had a brake chamber go bad about half way, parking brake side. Caged the two chambers on the wheel and used a vise grip on the line...

Just found this thread when looking up some information on the M66. I mounted one on my M1078 for my 1919A4. Admittedly, I didn't read every word but did read a lot and you did a great job! Learned a few things as well. I didn't realize there was a cap for the pintle hole. My ring didn't come...

https://www.steelsoldiers.com/threads/mep-016b-injection-pump-jammed.201667/

Turns out, you just keep tapping on the housing and it will come off from the adapter plate bolted to the motor. The stator made ever so slight contact at some point... probably why it wasn't making power. I didn't take pictures at the time but if I didn't already get rid of it, I will edit the...

I guess I never posted when I did it. I ended up finding a bonnet gasket that I thought was the right part number but needed to be modified a bit. Checked the valves and they were good. Gasket changed stopped the seep of oil though. I added a bar across the top with a hole to put a D-ring in...

Cradle modifications are 95% complete. I can not use a T&E with it. Got the PTO winch install done finally.

Glad you're going! Nice little mod on the fuel water separator. I just put a cup in there to drain it. Never have gotten any water as it is super dry where I am.

I'm taking this thing apart today and am a bit stumped on how to take the generator off. TM is useless. Work Package just says "Remove from Engine" Uhhh, okay. They will write 3 pages on how to change a hose clamp, but not elaberate on how to do this. So government!

Not sure if you ever figured it out, but I just got through taking one of these apart for not making power. Not sure why it wasn't, but I shared a few pictures before I did & it was with the rear cap off. Here is a link...

Triple check it is still not causing an issue. It;s really the only thing that makes sense from looking at the pictures and reading what you have done besides and issue with the casting o the injection pump or block making it not seat. Forgive the obvious question here, but you are getting the...

Looks like your hose clamp is keeping the injection pump hold down front fully seating the injection pump while also breaking the seal on the hose clamp and the nipple to the injection pump. Then, diesel is getting into the crank case. Had this happen to me, minus the getting into the crank case...

I pulled the control panel and alternator cover off to have a look inside. It all looks neat and in order but someone was in there. Some of the caps to the brushes seemed loose to I tightened and tested again... less than 1 volt now with the breaker not tripping. It must be toast. I guess it...

I did not equate "work" with military ordering. Should have read more carefully!