Search results

Do you have a way to scaleee that so we can print since theres no dimension

Yup this way i can lay on the floor and make the bends and lay it all out on the print We did the uprights today since i had those sizes

Yes i have a friend that can open the file and print it 1 to 1 for me

Can someone give me the correct hole locations on th bottom of the uprights from an original How far is center of the bottom mount hole from bottom and how far back from the face

Did you ever get this in cad with the correct dimensions

Any one know the part number on the steel one so i can look for the correct diagram in the tm

Just mounted a steel rear airlift bumper on my m998. do i need the reinforcement plate and inner frame angled brackets or are those for the aluminum version? I have seen some tm breakdowns but no idea if its an aluminum or steel bumper in the diagram

Looks good, i grabbed some steel just need motivation lol

How much total length flat bar do i need to buy

Need to build this for miine, how tall are the box tube uprights and what guage wall on that box thanks

Can someone with my same rear hitch measure thier pioneer rack front to back

I already tried that and elongated the holes more still not right

I did the tdm on mine but the real problem was the temp sensor on the back of the thermostat housing, its like $90

I looked up the part number listed above for the frame bracket and it looks identicle to the one i have, i slotted the one i have to the max and made it reach but the rack still doesnt fit right so im guessing i have the wrong rack The v ehicle already had the rack mounts on the new hitch so...

Im new to this all i knew when i got the rack was i needed the one with the straight latches for non airlift The latch tabs were already on the tow hitch thing Cant i just remove and modify the bracket between the rear wheels to allow the rack to go back farther

Gonna dig up this old thread,my rack does not fit my vehicle, i adjusted the front mount all the way ti tye rear and tried adjusting the tow hitch forward but no luck the uprights hit the rear bumper/ hitch

When i recently titled mine in n.j. with antique plates it came with a pa title from guy that bought it at auction, n.j. modified the vin, i believe they added amg in front and 92 on back of the vin, i did make them give me a copy of the original pa title in case there are issues later since...

Id probably throw both in the battery box , whats supposed to m I unt in that compartment next to the batteries, i have a bracket there

So where does this stuff mount and plug in, sucks i just wired in a small 24v to 12v 20amp unit for power socket

Ok so i decided to go for broke and plugged in the 110v plug, small box output is 27 volts Closer look at the big box said 24v inpout on one side and the decal on opposite side is painted over and i can only read the + - and word output I opened the big box and inside it says input output...