Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Your quote from Abraham Lincoln should be carefully reconsidered. He was one of the first presidents to usurp the Constitution to start and perpetuate The Great American Disaster,
aka, The War of Northern Aggression.
Look it up in any unbias writings on the subject.
I have both box seats and frames out of my M36A2 available. They're in great shape and looks like all original .
I'm located in North Florida between Tallahassee and Lake City near the town of Live Oak.
If really interested I can send pictures. Your pick them up and I'll let you have...
Tom,
I can not find info on the stuff you sell on your web site. Can you send me pics, etc. on the power steering, air locker and cab insulation template? I have a M36A2.
Thanks,
Orren
On board fuel processing
I am thinking along the same lines except I plan to haul much of my processed WVO and the processing equipment on a twin axle trailer. Also, I plan to carry a diesel powered generator on this same trailer with slave cable connecting a large battery pack so most...
Are you by any chance parting out some of the MEP003A's? I may be needing a generator off of one when I see the real situation with mine. Another screwing by GL. They switched on me and wouldn't make it good.
Thanks, Orren
On my truck, M36A3C, the rubber connector faces to the center of truck; might be worth a try?
Also, please let me know a good place to get a fuel sending unit replacement.
Good luck.
M36a2c
Need the date of manufacture, etc.
M36A2C w/w
NSN 2320000771619
VIN 032710499
Date of manufacture: ????
Manufacturer: ???????
Purchased from private individual in MN.
No markings on bumpers.
Thank you for your help,
Orren Winjum
Since you have some cables, do you have two prong slave cables or just the two prong male and female connectors?
Also, could use a 12 prong male trailer connector.
Also, looking for at least 5 'L' brackets used to hold the battery and tool boxes up. Light rust OK but no cracks or pits...
Slide in camper
I bet there's a lot of you guys that would like some sort of camper that could bolt in the M35 or better yet a M36 like mine. Using four hard points and a properly located tree limb it could be lefted enough to clear truck bed.
I have been studying the Alaskan Camper design...
Bait and switch by GL and FBI case
GL pulled a bait and switch on me with a MEP 003a diesel generator.
I have filed a internet fraud case with the FBI.
Lets see what happens. If nothing ,then the rot is very deep in our federal government.
I may need your storys, so keep the evidence...
GL bait and switch
Be careful. GL pulled a bait and switch on me when I got a MEP 003a. For some reason I wondered why they don't identify this equipment with the serial number; know I think I know.
If you pick it up they want to stick you with it even it you can prove they did not give...
WVO for fuel
I use waste vegatable oil mixed with 10% diesel.
First, I run the raw oil through 5 micron bag filters after straining
out the coarse stuff. Then I run it through a centrifuge that brings it
down to less than 1 micron.
This runs great in my 2500 RAM but I'm in North...
The rubber end cap does nothing but cover the adjustment screw/nut. I had to replace the whole thing but you might get lucky and just be able to clean it inside.
Note: I had to reorder mine twice before I got a new one that worked. Typical for the junk put out these days. You could try a...
Why?????
Quiet duece is an oxymoron:
That big pipe in the air is what it's all about. No appreciation for the greater things in life it looks like to me.
Besides wait until you go offroad in a nasty place and you can kiss that undercarriage pipe goodby.
There's a lot of ways to quiet...
LED lights
Where do you get these varible voltage rate LED's? I think this is the best way to go for me to change out my trailer's bulbs.
Thanks, Orren