Search results

Thanks guys for the help, as soon as this weather breaks Ill check for kinks in the new fuel lines I added with the spin on secondary fuel filter ( I did have a **** of a time installing them) and the fuel shut off. If worst comes to worst Ill buy a fuel injector pump , there not cheap. Never...

I did notice when I was working on it the fuel shut off didnt feel the same, I should check that

Doghead what is a bad HH

It alway starts great in the cold

Ok heres my problem, when I would take my deuce out and run her at full speed she would start to stall out, then I would have to nurse her home. So over the weekend I noticed I had some sandy like settlement in my fuel tank. So I removed my tank filtered all the fuel, did several gasoline...

very cool

Well my tank was taken off to see if that was part of the problem, holly s*&t. It was bad , lots of sandy like stuff. So it got several gasoline flushes then a good power wash. Next I need to install my secondary bolt on fuel filter. Just orderd all new belts thats next, any advice on putting on...

thanks for the info greg2560.

Same thing here xjrockrawler, exact same thing !!!!!! I changed out my primary fuel filter to a new bolt on system. Didnt have enough time to change the secondary to the new bolt on fuel filter and guess what the same thing happened to me yesterday on my way to my first MV show near Lansing ...

Maybe not goldwing2000 I broke down Friday afternoon on my way out there, ended up driving my pickup truck out there. Im going back today

Its hard for me to tell how the % of tread is left, Im sure the rims are worth more. I was thinking maybe $35-$30 each.

When I bought my deuce it came with an extra set of ( 6 singled 9-20 tires and rims ) condition is average. I dont need them Im singled out with new 11-20. Someone asked what I would sell them for, I have no idea. Can anyone help ? Thanks as always....aua

Thanks Gunboy1656

Does anyone have the TM # for the M105A2 Trailer ?

Im looking at painting two M105a2 trailers, one trailer just the chassie and the other the whole thing . How many gal. of rustoleum rusty meatal primer do I need. And what ratio due I cut it with xylene. Thanks

After reading some of the sites and using the search engine, what is the right Napa # for the lower radiator hose. Is it Napa# 7759, 7423, or 7372 ? Thanks Rich

This winter I ordered a new horn kit from Eriks surpplus, I installed it yesterday and it works great

I was looking at my TM 9-2320-361-20 ( 3-48 oil cooler tube and hose replacement ) page 3-108 these are the two hoses that I need to replace. Not sure if there 2" or 1 5/8" ?

Thanks Heavysteven:beer:

I was just changing out my oil filter to spin on oil filters and I noticed a few drop of freash antifreeze behind the old oil canisters and then after looking around I found a few more drops. Its leaking from the short rubber hose behind the old oil canisters, does anyone have a part number for...