Search results

Wrecker guys, how often do you use your ground spades with the rear winch?

Anyone have information on lubrication for the m66 ring mount. Mine turns but its a little stiff. suggestions?

Down with John Winslow this weekend I asked the question and his response was: 1 hole injectors give more power along with more smoke 2 hole injectors give less power and burn cleaner I will be putting the 1 hole injectors back in for the power, my 1D engine is sluggish with the 2 holes...

Does anyone have the instructions to install the adapter that goes on the end of the wire rope. A friend who will remain nameless ripped his off the end of his cable and will have to install a new one in a few days.

I took a much needed side trip this weenend from my mother in laws place in Williamsburg Va to Halifax N.C. to pick up some stuff at John's. It was an easy trip all highway, his place is about 18 miles off I 95 in quiet, clean air and water farm country. It was a neat and organized collection...

anyone?

Anyone know where to get one

Anyone able to add the following manuals to our site? TM9 2815-210-35 TM9 2815-204-35 THANKS!

I got down there in the afternoon, quite a few venders already there. Picked up some stuff early for me and a buddy. Today will be better and Friday will be the best day as showers are expected on Saturday.

Construction on I95 south will begin on 5/7 in Delaware. DelDOT posted a roadside sign at the south bound I95 exit off RT141. RT 141 is just south of the Delaware Memorial Bridge. Check your maps and the DelDot website for further details to avoid a delay on the trip to Aberdeen. Route 13...

Can anyone confirm? If not is there a rebuild kit available? NOS units around?

anyone have any nos ones? I need both

Are they interchangable? Is there any danger in changing from 1 hole to 2 hole or 2 to 1 hole, if you install all of the same type? Are there any benefits to switching?

I need the following rear portion of the wiring harness I have a 101 harness any trades? front landing wheel assembly one or two wheel 1 safety chain for the pintal end 1 tailgate chain and snap hook 1 center mounted rear stabilizer leg anyone have any of these parts comming to Aberdeen next...

John Tennis is making an adapter that screws into the existing primary fuel filter housing that will allow the installation of the NAPA part# 3405 spin on style filter. NAPA gasket # 5070 is also needed to be installed between the adapter and the stock housing. The unit is machined from round...

My front differential seal is leaking, the seal (part# 18 on figure 79 20p) is on the front side of the differential on the front axle. The oil is getting slung by the companion flange dirt deflector and further sprayed by the fan and spraying oil every where. Has anyone changed this seal...

Has anyone addressed changing the other water/coolant hoses on the Deuce multi-fuel? In addition to the upper and lower radiator hoses there are a couple of short hoses on the right side of the engine that are short straight rubber near the manifold. I havent seen these for sale. Any ideas?

I arrived at Marksgarage2's place around 9am. We removed the old steering box without removing the radiator or sliding the engine to the right. Yes, it can be done thanks Gene! Pictures of the trashed steering box innards and the proccedure to follow thanks again Mark for your help.

My Deuce is about an hour away from my house with the bad steering box. I will be going up there with a replacement and need the sizes of the following bolts. The manual calls for removing the radiator and disconnecting the motor mounts. What size bolts hold the motor to the frame and the...