Search results

As an old member with a new project, I am surprised to find that obtaining dimensions or reverse engineered information for parts is hard to come by. I am in the process of restoring an 1151 Rev to its original Up Armored glory and have been collecting quite a few items. Other than the random...

Hello all, So I just purchased a set of Frag5 doors and side armor and I'm now trying to figure out the turret assembly. I have an OGPK that will go on it, but is the MRAP version compatible on the HMMWV (M1151)? I heard the gear teeth are sharp on the MRAP version, and the BPTMU drive system...

Ok….so Ive been researching all the info on the OGPK turret and came across a manual that shows exploded diagrams with part numbers. The OGPK has more of a flat panel in the back, and from the photos I’ve seen of the MCTAGS version, it has angled sides that connect to the back panel. I’m so...

So, I'm in the process of an Up Armor M1151 and I am going with the Ibis Tek front windshield. Does anyone have a diagram or parts manual for these? I checked the TM's and couldn't find anything. I have a line on new production heated replacement glass for these, but I want to make sure I have...

I could use some help, I purchased an M1151 REV and would like to up armor it with an OGPK type turret, with electric swivel. I've spent many hours looking thru TM's and online, but there seems to be a lot of different turret styles and options. My questions are: What is the most heavy duty...

Does anyone happen to have an exploded parts manual or a link to one for the LMTV transmission? I believe its an Allison 3070PT. Ive searched for a while both on this site and off, but can’t seem to find one. Im trying to fix several major leak areas. Thank you!!

Hello all... I have a 1998 M1078 that seems to be having a transmission issue. Can someone please let me know what transmission I have, either WTECII or WTECIII? Its putting out a code 5517, and from what I can tell, its most likely a trans oil temp issue, too cold. I'll be changing the fluid...

I've spent hours now trying to figure out what the part number is for a completely missing Transmission control module. Does anyone know where I could find the info, or possibly know the part number of the unit I need? Thanks all

So my M1123 is in process of getting running and back together, and Ive searched quite a bit thru the manuals, but can't seem to figure out what the large canon plug under the L/H back seat is. The canon plug is there....but nothing else. Please let me know if you know what it is. Thank you!

Hello all. The information I am looking for is most likely in the TM's section, but I'm lost as to where. I have a 2016 M1123 that is missing the gauge cluster. I found a page from a manual that shows the plug numbers and where they go, but there is another thicker shielded cable with many...

So I just received my M1078 from a DRMO in Hawaii, and all of the vehicles they sell are completely drained of fluid. I flew out there and temporarily got all the fluid up for shipment. My question is, Ive read the procedure to change the fluids, and even watched an informative video. The...

Helpful input needed.....Just got the M35 and in the process of Bobbing! I have a late model 24v Cummins/Allison drivetrain in my garage, and I'd like to install. Has anyone done this conversion, or one similar? I will be starting next week, as long as I don't hear that its impossible.....

OK, Id like to purchase an M35 and convert to Bobbed. Question is: How do they tow? I dont go far, but I tow a 20K LBS, 40Ft wide load boat. Can the Duece do it at freewat speeds (55)? Also, does it have enough low end torque to get this boat out of the water on a launch ramp? Any help will be...