• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. porkysplace

    5 ton won't build air to trailer

    What kind of 5 ton and trailer ? Are the lines crossed ?
  2. porkysplace

    55-mph

    There is a great feature on every page in the upper right hand corner called Search , typing in " HMMWV tires on a M1008" brought this up as the first thread Any one running hmmwv tires on there m1008 post #3 will give you plenty of reading on the subject.
  3. porkysplace

    Does anyone know anything about Mack DM6116S 6x6 tractors ?

    I doubt it was military , most likely a pipeline or oil rig truck .
  4. porkysplace

    Insurance on a 5 ton

    post # 2 of this thread from earlier today will explain it . Insurance agents in AZ for M-35-A2?
  5. porkysplace

    M1008 Winch

    Post # 10 of this thread will give you links to all kinds of CUCV winch information . Winch help
  6. porkysplace

    Insurance on a 5 ton

    Start searching because this thread will be locked in no time . driving record ,intended purpose of use, state you live in are all factors .
  7. porkysplace

    help identify trailer I am looking at buying this weekend?

    The trailer weights close to #3000 pounds empty , a #3500 pound axle doesn't leave much load capcity.
  8. porkysplace

    Georgia Title Law Changes: Need assistance from GA and other States Members

    The link in post #1 of this thread may be of interest to you ; Katrina Deuce Story - MUST READ link to link in post # 1 ; http://lonestar-mvpa.org/events/2005/05_Katrina.htm
  9. porkysplace

    Air Compressor Test

    Try the troubleshooting section of the TM's.
  10. porkysplace

    prototype jeep maybe?

    The M 151's were built by Ford long before Pinto's were even thought about.
  11. porkysplace

    plow pump on cucv

    Anything off a early 80's GM 1ton will bolt right on with minor work around the front tow hooks . The truck is 12v except the starting system . Personally the belt driven plows I have used were slow to do anything ( lift , angle ect. ) Edit; If you do a search there have been several plow...
  12. porkysplace

    Just bought my first deuce

    Post #6 in this thread has a link that will help decipher what you have. Deuce Manufacturer?
  13. porkysplace

    Frozen rear ujoint - tricks to freeing it?

    Forgot about GM doing that with the plastic .
  14. porkysplace

    how much is the bed and toop seats of a M923 going for these days?

    After a long time it looks like patracy sold his for $50 .PARTS FIRE SALE, some parts fit 939, 809 and M35's Cab 50 1 SOLD
  15. porkysplace

    Frozen rear ujoint - tricks to freeing it?

    You beat on it long enough you will bend the ears on the drive shaft .
  16. porkysplace

    Frozen rear ujoint - tricks to freeing it?

    A press.
  17. porkysplace

    Winch mounting

    A good start will be found here TM's for the M37
  18. porkysplace

    Brake lights still dont work , something wrong else where ?

    Which thread ? Need new brake light switch No brake lights till you mash the peddle ? You need to keep one thread going so all the information is in one place so pleople know what you have done and the results . Starting a bunch of threads just makes it harder to help you and harder for...
  19. porkysplace

    cannot post trucks for sale?

    Can't post to the classifieds? This is a sticky in every classified section.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks