• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 2

    Can you spin tire?

    Are there any worries with EGT's with a load and a grade to pull?
  2. 2

    Can you spin tire?

    When you guys do turn up the fuel, is there any effect on MPG?.
  3. 2

    Can you spin tire?

    An M1009 will spin on dirt guaranteed if you add water.
  4. 2

    How do I install trailer brake control?

    I used the Prodigy brake controller. They are the top of the line, can be mounted easily because they don't have to be horizontal and are basically plug and play. Mine cost $150, napa wanted $188. You might do alittle more shopping than I did and find it for less.
  5. 2

    How do I install trailer brake control?

    What I did on my M1009 was install a 6 pin receptacle to run electric trailer brakes and leave the 12 pin where it is. I used another set of connectors so that I can unplug the 12 pin and plug in my 6 pin and vice versa depending on what trailer I was using. Then plug in an unconnected set of...
  6. 2

    Slave jumping

    When you turn the key to start does your volt meter move?
  7. 2

    Trans cooler lines d/c

    The only reason I can think of for disconnecting the lines would be that there is a leak and they didn't want to fix it. I think I would check the lines to see if they weren't rubbing and worn thru somewhere. I do think that running without any cooling of the fluid is likely to cause...
  8. 2

    Trans cooler lines d/c

    Is it plugged at the transmission? or are the holes plugged in the radiator and do the lines possibly run to a cooler? I have my radiator plugged but I'm thinking about re- routing the lines to run back thru the radiator, because the oil may stay too cold or cooler than it should be without...
  9. 2

    M1009 Pintle hook rating?

    I agree totally with Warwag. You have to drive like anything can happen at any time. I came down Cabbage hill with the M1008 on the trailer which is 6% for 6 miles. I stayed behind a semi doing 25-30 all the way down. I even turned in the hubs to give me alittle more rolling resistance before I...
  10. 2

    M1009 Pintle hook rating?

    I put a M1008 on a HD car trailer and my M1009 pulled it fine, up and down 6% grades, I went slow 25mph up and down and tried to keep it at 50mph the rest of the way. I have one of those convertible bolt on hitches in place of the regular pintle hook. The 1200lb rating is rather cautious, I went...
  11. 2

    What is my 1985 m1028 worth .

    That truck would be snapped up out here for 3k if it runs half as good as it looks. 3K is low in my opinion but location is big. I would personally stay away from one that has been "restored" if I couldn't see it and go over it in person. Too much can be hidden with paint and bondo in pictures...
  12. 2

    What is my 1985 m1028 worth .

    That is a beauty. I haven't seen any out here in Oregon for sale in that condition. I agree ebay would be the best bet to get top $. If you put it on let us know. I would like to see what it ends at.
  13. 2

    Will these tires fix a M1008?

    I want to put a set of 1100X16 zxl Michelin tires on mine but I don't want to lift it more than 4". I'm wondering how much cutting that will take.
  14. 2

    M1009 air conditioning

    Getting AC in a M1009 is complicated and expensive, but I was wondering if anyone was thinking of using the rear unit out of a suburban? You wouldn't get the max cooling, but it might be ok.
  15. 2

    M1009 towing

    The M101a2 I have has surge brakes and they did come into use once for me to where if they weren't working or if it wasn't an a2 trailer, I would have rear ended the car in front. I would never have considered a tow dolly. I saw a wreck last summer where the vehicle on the dolly took control...
  16. 2

    Just picked up my first m1008

    Are you sure nobody swapped out that dana 60? That is a good price. I've seen a few for sale with the original replaced. 255/85/16's are 32". I would bypass that resistor and then add the glow plugs. At least make sure the connectors at the plugs are good. If one is bad you can lose them all.
  17. 2

    M1009 towing

    I always forget something. One time last year it was the winch controller. I hate it when that happens. Thankfully this one drove itself up on the trailer. If the blazer broke down it would have switched places.
  18. 2

    M1009 towing

    I did take one with my cell phone. It was at the Deadman Pass rest area. The name of the place was not confidence inspiring. Deadman Pass is at the top of Cabbage. I turned in my hubs there just in case. Poor quality. I forgot my camera.
  19. 2

    M1009 towing

    I thought I'd relate my experience. I have read alot of other posts on the subject lately because I wanted to do some hauling. I flat towed a M1009 with another M1009 a few years back with a bad experience. No wreck but white knuckles, and I would recommend against that. I have a heavy duty car...
  20. 2

    So who outbid me? (eBay, 11/9/2010)

    I don't think ebay can keep track if your friends and relatives bid your no reserve stuff up for you. I just think if its possible, it's probable.
Top