Search results

Did you move BOTH tires on the front or just one? While you have tires jacked up, spin them and look for wobble or tread separations.

Agree completely, which is why I made my own out of aluminum angle. I will never understand why MSG made all these GMV add on parts out of steel for an aluminum truck.

Hmmwv has the world’s most delicate electrical system, merely slaving one off is likely to smoke the alternator start box and trans controller.

Hmm didn't you say something about "OEM guy", we are seeing muffler shop exhaust and wretched bedliner.

Welcome. What many have done with excellent results is to purchase a GovPlanet truck at Yermo, then contract with RetiredWarhorses in the Bay Area to fix it to your specifications. Then have it transported to your AO for you to add your own custom touches whatever they might be.

Code 45-22 is “open circuit G solenoid”. Definitely results in “DNS” or shift inhibit. Most of the time it’s connector problems. Reseat and clean all your connectors.

Takes a hd transmission jack with a fixture you must fabricate to hold xfer at the proper angle. Make sure you trust the jack and fixture with your life.

Napa had a 24 volt pump in stock? Good to know. I guess you could stick your tongue on something metal stuck in the connector. Tingle is +24.

My BatteryMinders do that too, they are fooled by the voltage not being 13 ish. In no time they cycle up to showing 100%.

We forgot his truck is still en route.

Huh? These sell from $5000 to over $15000 routinely.

Look on the back of the PDP Power Distribution Panel cover, there should be a decal with that info. If not it is in the TM.

Finally a M1031 build thread where the first thing someone DOESN’T say is: “I bought this nice M1031 but I really wanted a M1008 so I am scrapping the maintenance bed”

https://www.steelsoldiers.com/threads/m1078-tms.118919/ TMs for the LMTV, most is the same as 5 ton.

https://www.steelsoldiers.com/threads/my-tip-for-spare-relays.198790/ For some reason this info is not on the spreadsheet.

https://www.steelsoldiers.com/threads/lmtv-fmtv-quck-parts-reference-spreadsheet.155667/

Tell us about your torquing and re-torquing process. Do you have the special Snap On tool to torque the obstructed nuts?

Southern Automotive has the parts and support you need. Don’t drive it like that.

Has a lot to do with both George Bush and Stewart and Stevenson being from Texas and Navistar isn’t.

Does the bed come down nice and slow or is it violent? It should be slow.