Search results

OK here are the spec's: 18 foot long by 8 foot wide Number of beams is your call (I am hoping for 6 to 8 inched of total deck height when it is sitting on the ground) Weight limit of 9500 pounds Safety Factor (have no idea) what is the norm for trailers? Going to weld a Diamond Plate steel...

Wetting dry stuff down helps keep the dust to a minimum. If you can add a gelling agent like gell-o to it to help keep the dust down. This is just a general observation... Those heaters will sell for $100 plus each.

Once you get the heaters out you can sell them. They are multi-fuel heaters if I remember correctly.

All I need now is for an engineer to give me the C-channel or i-beam sizes I need to fabricate the platform. I figure at least 16 feet long and about 8 feet wide. If anyone can help I'd appreciate it.

Here is a M840 shelter dolly I just got. Going to convert it into a drop deck trailer.

Thanks gimp :D

HAs anyone had experience using this trailer? How long of a container/shelter can this dolly carry without modifications? I was thinking of welding a permanent platform between the front and back sections so they act like a drop bed trailer. Will the trailer allow the welded platform to...

I recovered the trailer today. All parts we intact and in great shape. They used a very large all-terrane forklift to move the trailer that was blocking mine. Told the driver not to move mine! Told him I'd hook it up to my Deuce. I drove my Deuce in to the field and with Warren's help...

I would get a different seat and build a base that is the hight he needs. I installed short versions of Freightliner Air ride seats. They are height adjustable and give a nice soft ride.

There is a reason he is known as Maddawg =mad at the world

Can you give a source or Model number for the bulbs?

We are in Slidell, LA. If you land near by give us a holler.

I looked on their web site and did not find any. Can you provide an actual link to the item?

The controller has settings that can be adjusted for timing and the amount of braking pressure. I used to have the Draw-Tite Controller in my Isuzu NPR and I was able to adjust brake pressure with the dial on the controller. It was wired to my brake light switch. I believe the brake switch is...

Do you work for the GSA or other government agency? You seem to prefer the most expensive solution to the problem! :roll::roll::roll:

Why not just go with 14.00-20 they are cheap and you can get the hemmt rims for them cheap as well.

The cheapest way is to install a 12 volt actuator ($56.00) and use a relay off the brake switch to activate the controller. You run the wire from the brake switch to the coil of the relay and tap a 12volt line on the switch side. When the brake peddle is depressed the 24 volt triggers the...

Glad you got some of your money back. Maybe you can buy the truck cheaper this time around?

They are going to tell you to download the TM's and read them. There are instructions on how to bleed the system in the TM's.

Look great! :-D