• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. A

    mep803a fuel pump not clicking

    i think that the fuel pump is bad. ran the generator last night for the first time in a couple of months. after a few minutes of running it turned off. i went through the section 5 - troubleshooting 2-11 in the technical manual, specifically "cranks but fails to start". the fuel pump is the...
  2. A

    Mep803a ammeter showing zero, no charge

    I checked the fu1 fuse it's good or has continuity. pulling that fuse while Gen is running causes the meter to dip below zero and with the fuse in, it sits at zero. I have about 27v going to the exciter on the alternator and 28+ coming out of the alternator. The ammeter has zero voltage at...
  3. A

    MEP-803a ac interrupt switch

    Note: i have the wiring diagram ac interrupt switch, S3, has 3 wires connected to it at positions 5,3&6. once the generator is on, flipping that switch up makes a connection between 5&6 which turns on ac (continuity tested). turning off the ac is my question. i do not understand the wiring...
  4. A

    MEP-803a water pump backing plate gasket

    hello everyone! just bought a generator! had some minor issues when it arrived (burnt fuse for charging batteries, dents and missing bolts). the question is, the water pump backing plate gasket appears to be leaking, slightly. i order a gasket kit which includes said gasket. while i wait...
Top