Search results

Master switch on, no fuel at the bottom of the fuel filter where the drain is at. I checked the check valve at the tank and it is OK. Opened fuel line at the top of the engine and could suck fuel with some degree of difficulty. Does the lack of fuel at the drain on the bottom of the fuel filter...

I have a 1997 m35a3 with a bad generator and wanted to see if anyone had replaced the 60 amp generator with a Niehoff duel voltage 260 amp generator? Or is there a better replacement? Cost for the replacement 60 amp is pricy. The reason why, I have access to the 260 amp generator for free. Thanks

I searched for wheel bearings for the trailer and came up with a list, but when I disassembled mine the numbers for the outer bearing is different. My trailer has a timkin 2585 not the 25580. And the seal has a number of AD3135-E1 and it is the same as the 1036 also the RG06-070. Has anyone had...

The longer I run the truck, the more the volt gage fogs up. After 2 hours of drive time this week, the gage was unreadable. When the truck is first started it is clear with no sign of moisture. After is sits after driving, it clears up. I don't recall this happining in the past. Truck is a 89...

How do I Identify which IP I have? I have an 89 M35a2c, and I want to find an ID number or tag that will allow me to get parts or replace the unit. I looked the unit over, but I can't see any tag. Thanks RG

I just changed the transmission on my m35a2c. After a short test drive(500 yards), I removed the trans top cover and the oil is foamy. I installed a rebuilt GL tranny and I used GL 90 with a cup of Lucas oil stabilizer. The tranny was dry when I put it in, no water. Is this OK or is this a...

I had to remove my transmission today because of missing teeth on one of the gears. After removal, I noticed the throught out bearing was very loose. This truck has 9500 miles on it and I am now wondering if I should replace the clutch and pressure plate at this time. Any thoughts from you guys...

I recently purched a m35a2c from GL. when I recieved the truck, three gears in transmission have chipped teeth. Truck has 9000 miles on it, I can't understand how it could have such damage with low milage. Being former army, I have used and abused these trucks with out any type of impact. Any...