Search results

Has anyone done any research on a m939 rear shock absorber upgrade? I saw some of the prototype m939 trucks have them at approximately a 45 degree angle on the front axle. Think it would help my constant hopping on my rear axle.

Anyone interested in a dual circuit ctis system? This means the front and rear tire pressures are able to be programmed independently to have better tire wear and ride quality. Some of the factory black ctis controllers are able to use this system or the newer MRAP controllers with the...

(DEAD PROJECT) Are you looking to purchase MTVR doors for your MTVR? As you may know, Oshkosh is currently asking over $26,000 for a pair of doors and the price is only increasing every few months. We have finalized the design of new replacement doors and am looking to determine the number of...

What are the differences between a m939 and LMTV CTIS controller. Are they interchangeable and if not why?

Does anyone have the part number or an eBay listing for the 3 solenoids on the pneumatic control unit under the passenger side kickplate? Not talking about the pressure transducer.

Does anyone know how much gear oil a M925 winch will take on both sides of the gearbox?

A little confusing here but I assume it is the same. I have an m931a2 with dual g177s and I want to convert it back to super singles. I want to know what all I would need. Do I need to change out the studs or just get new nuts?

Is it possible using LMTV wheels and tires on a m931a2 and use the LMTV CTIS wheel valves and such on a 5 ton and still have it work?

I tore apart the front of the intermediate axle on my m923a0 to replace the front seal on the axle. In the process of getting the front cover off I tore and bent the shims on the top loader. Is there any specifics on lash and other precise measurements to take the rest of it apart and replace...

DEMILITERIZED and Swiss M931a2 Build Thread Picked up a m931a2 a few years ago from a interesting set of circumstances. Have steadily done some modifications to it but nothing major until now. The plan is to make it into a offroad dump truck. Truck is in pretty good shape overall but had a few...

https://www.govplanet.com/for-sale/7-Ton-Cargo-Trucks-2005-Oshkosh-AMK29-MTVR-7-Ton-6x6-Dump-Truck-Georgia/4308326?h=5000%2Cq%7CAmk29&rr=1&hitprm=&pnLink=yes Is this a good buy? Is it possible to find doors and glass for these or is there too much missing for it to be a good deal?

So I have a M931a2 and it currently doesn’t have any brake lights or turn signals. The brake lights weren’t working so we replaced the switch on the frame and everything worked. Then I took it for a cruise on some dirt roads which may have shaken something loose and hooked it up to our bolster...

I was wondering how a m1082 trailer bed would fair as a dump bed. I am referring to the aluminum sides. Would there be any way to easily reinforce them or would they be ok for smaller loads. I was thinking of only hauling dirt/ sometimes 57 stone and not boulders.