Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
this should work and its 12 volts so they could be converted easily to a 12 volt system
https://www.amazon.com/STARTER-TRACTOR-HERCULES-1987-1988-1990480/dp/B008XOJ718
Well i will need to get a new hose for the remote Reservoir kit i got from you was getting truck ready to go for memorial day parade and it is probably nixed my hose sprung a leak all over. Some **** rodent decided to use it for a chew toy and prferated it for about a foot in the middle of the...
Well we worked for a week and a half rebuilt master cyl bled brakes installed spin on conversions to all places removed and partially cleaned up fuel tank new air filter cleaned and touched up paint and ran it in memorial day parade. It had been sitting for 2 years un used. Rod
I saw a 800 series 5 ton tractor on a flat bed and a long box trailer in cammo heading east on I 80 at about 7pm tonight someone must be getting a now ride!
Rod
Just wire the pump up with 24 volts it will be fine actually it is easier on it than dumping a load on 12 volts. those motors can handle up to 48 volts. How do you think they get the the nigerian boys cars to hop? 48 volts to a 12 volt pump so it will pump fast enough!!! DUH
guys you could write a jingle going to busty hearts on my way looking for some M V parts well i need to think for next line i am not to good with lyrics
the ones on corner of 59 and 46
seen them 2 times in past 3 weeks been up that way i see 5500 for 1 and 6000 or 6500 for the other kinda rusty for that jing then there is this mv hoarder up by the nudie bar he has them all over the place.
Joe just kidding i had to say that!!!:roll:
Rod
what i was pointing toward is using the bigger lug studs like ones on commercial trucks so all you would nee is your outer hex nut so you would just need the 10 for each side up front
Rod
Looking to see if there is any interest in 10 bolt hubs to fit a deuce made of good steel would it need smaller lug studs to match front or use big ones so you can use existing hex nuts off old duals. Were hoping to be alot lower than a wicked six made of aluminum. need to know interest before i...
I got a quote from gico you need to talk to the commercial dept thay are new and are handling the 10,00 and over vehicules mine for liability only was 635 a year with a comm class 8 plate when i find a deuce
i might be able to just reach if i took out seat and just sat on a 12" high box with no back i may be able to reach pedals may not certain not what i want to do
ideas
i been thinking about preforming open cab surgery with my plasma cutter.
I think if i cut off back of cab about a 1.5" after doors ands added 12" to cab moving rear cab mount back a foot and shortening the bed a foot get a fiberglass roof and stretch and whalla i should be able to put in...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!