Search results

Thanks for all the info I will lightly clean it and run it through a few heat cycles and then make a decision. Probably leaning on getting it replaced or rebuilt.

Looking for some advice When I removed my bumper to change out my cab mount bushings I noticed what appears to be seapage on my lower radiator. I haven't noticed any fluid loss but does this look like the start of a radiator failure

General you are correct I should've started a new thread Ronmar I did the test on the governor you suggested and it does appear to be working This coming weekend I will connect a gauge to the wet tank and hook up shop air and look for a leak

I am having the same issue with the air dryer purging about every 30 sec with the old style. I then read through the TM and it said replace the air governor because when I take the control line off I feel air coming through (when line is off no purge) so I Put a new governor on with no change...

Thank you Looks I will go that route i was hoping to support someone on the forum Thanks again

Good afternoon does anyone have the 2 throttle linkage springs laying around or know of a source to buy a set the TM show part numbers Inner spring 15961524 outer spring 15961525 currently only the inner spring is broke and the truck runs looking for the set but willing to just take an...

Looking for a set 4x4

This may sound dumb but When i first got my 96 model i had they same type of issues I couldn’t get any speed what so ever and transmission wouldn’t go into 6 gear some of the time and never 7th So after banging my head against the wall because I couldn’t open the cab do to a leaking Oring on...

IN

Well just wanted to say thank you All for opening my eyes up to the driveline issue Needless to say my front shaft was a wreck $1300 later she drives smooth

This is from the site. Didn’t have a good pic of the pin but the site said this was an alternative https://www.finditparts.com/products/4846484/bosch-0332209204441#description

On the Finditparts site they currently only have the Bosch 24v 20A 5 pin in a mini version would this still work ?

Looking for some help to locate a source to buy a Double v groove idler pulley Part number 12420812 pulley 933-M16X50 Bolt I have the bracket but it is pretty beat up Looking for parts or entire assembly