Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I know this is responding to an old post but the MPU (Magnetic Pick Up) can be unplugged by the starter. It produces an AC (not DC) voltage of between 2-3 volts AC. If it is below that, loosen the locknut and turn it clockwise 1/8 turn at a time and then recheck.
Wow. Your issues are exactly the same as what I am seeing with the 813 I just bought from GP. Tar in the bottom of the fuel tank, fuel tank sender not working, and minimal fuel pumping. The return line just past the rail is leaking too. I got it running just to make sure it was worth...
OK I missed that before THANKS for pointing it out again. I cancelled my group 26 order and instead ordered two of these walmart U1R-7s. EXCELLENT to hear that these tractor batteries are still working after 3 years. I mean, as long as you keep a charge maintainer on them there is no reason...
Thanks for the pictures of fitment. These 26s look good in there. This is just a generator after all, and you have 2 batteries. If this were a 12 volt system, you would be able to use 1 650 cca and it would be fine. With twice the voltage you only need half the amps to do the same work. I...
Nice catch on the hour meter. I will go check that out. However, this unit arrived today and I was able to give it a quick check. The oil looks good. It's a perfect honey color with zero white froth or anything bad looking. And it's not over filled / reading high on the dipstick as it...
Yes, will certainly check the level of all fluids and drain/replace them all when I receive the unit by end of next week. Since all the units sold that day have the exact same oil, but no white froth (which is commonly seen with water in the oil) I am still skeptical about there being any water...
I bought sight unseen like most people but the pictures make it look very new inside and out. No rust even on the skids. This thing has been stored inside IMO.
I looked at the videos from the other four MEP-1040 gensets which sold today. In 3 of those cases they also showed the genny running...
Hi folks, new member/first post.
I just bought a new (5 hours) MEP-1040 from GP and now I noticed in one of the vids that they show milky colored oil coming from the filler cap during their run test. Sadly I did not notice this when looking through the many pictures and vids before buying but...