• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. C

    MEP-006A not making more then 50 volts

    I will definitely check when I can… today is my 19 year anniversary so not able to work on it today! And as always thank you so much for the help
  2. C

    MEP-006A not making more then 50 volts

    I just opened the relay box yesterday and it was filthy so I have some cleaning to do first! The only reason I was asking about the bus bar is because I do not see one on this unit but in the diagram it looks like there is a bus bar that goes across the top 4 lugs!
  3. C

    MEP-006A not making more then 50 volts

    Is there supposed to be a bus bar across the top because like I said this is all new to me I just got this and by the diagram it looks like it should have one to convert to 120/240
  4. C

    MEP-006A not making more then 50 volts

    Never mind I just looked up how to test the potentiometer at the j1 connector and I’m getting proper ohm reading so it’s not that! Dang I was hoping it would be something simple
  5. C

    MEP-006A not making more then 50 volts

    0-73ohms on the voltage potentiometer
  6. C

    MEP-006A not making more then 50 volts

    Thank you for the help it’s a little hot here in central Texas at the moment so I’ll check and get back to you
  7. C

    MEP-006A not making more then 50 volts

    I am definitely trying to figure out these schematics but I am struggling for sure! Yes I have the -34 downloaded to my phone
  8. C

    MEP-006A not making more then 50 volts

    Ok so I just got a new voltage regulator installed and no change !
  9. C

    MEP-006A not making more then 50 volts

    I didn’t but I was getting open circuit on many of the diode’s
  10. C

    MEP-006A not making more then 50 volts

    Thanks y’all I really appreciate the help… I did some testing on the regulator and some capacitors or diodes had no ohm readings
  11. C

    MEP-006A not making more then 50 volts

    I just bought a Mep-006a gen set that makes only 50 volts on the 120/240 setup and holding it in the start position is the only way it’s making proper voltage can anyone chime in … any help would be greatly appreciated
110,448members
165,042threads
2,321,918posts
1,152online users
Top