• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. F

    MEP-805A 24 volt problem

    So, new 1N5406 3 amp diode. Fired right up dragged it outside ran it a bit. Shut it down, no 24 volts. Well wiggled the connect p8-J6 connector' Yup, 1 corroded pin set. cleaned up all good, thank you Kloppk. One more question, upon start up the under current light will come on, I dont think...
  2. F

    MEP-805A 24 volt problem

    Is this common or how it behaves when bad?
  3. F

    MEP-805A 24 volt problem

    E-stop out- 24volts both sides Master off- 24volts Pin 3 CB1- 24 volts both sides CR1- 24 volts both sides Estop out Master switch prime/run CR1- 178C 24volts, 162A .0132 volts Everything else previously with 24 volts- .0132 volts Estop out master off, panel light has 24 volts in the off...
  4. F

    MEP-805A 24 volt problem

    24 volts all the way thru to CR1 from S10. As soon as the e stop is pulled out, I lose 24 volts on the left side of CR1
  5. F

    MEP-805A 24 volt problem

    Batteries charged Dead crank-Yes S17- pulled out 24.5 volts both sides S1- off 24.5 volts pin 3 CB1- 24.5 volts both sides CR1- 24.5 volts both sides S1- master switch- any position but off, No 24 volts on any of the previous listed places As previously stated it would crank and run with a...
  6. F

    MEP-805A 24 volt problem

    This one ? TM 9-2815-255-24P
  7. F

    MEP-805A 24 volt problem

    Yes it dead cranks. will look into the rest today, thank you
  8. F

    MEP-805A 24 volt problem

    Hello everyone, I have been searching for answers but not getting far. A friend has a 1993 MEP-805A with 21 hours on it. To begin with was it would sometimes/run start but when it it would not crank he showed me how he drops the control panel down and wiggles the wires in the area of S1 and S17...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks