Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks, I'll have to look into getting a Kill-a-watt meter, but I do have a multimeter.
And yes, I do have it set to 60
But I should be able to get an accurate reading from the back of the gauge itself and the 110 outlet, correct?
Sorry for the confusion/questions, just want to make sure I'm...
So I received your Voltage regulator upgrade and installed without issues. It seems to have fixed the problem we were having, but now it is showing a low frequency on the gauge, at ~48 Hz. The unit fires up just fine, the generator comes online, and all warning lights are clear, but the gauge is...
Hey thanks for the help! So I found your post for the updated voltage regulator and just have a couple questions before I pull the trigger on it.
This does bypass the transformer I am currently attempting to repair/replace, correct?
And if so, and if I'm understanding everything correctly...
Hey thanks for the quick response!
I will have to look into getting that fuse mod installed. And I did not, test for that as of yet. Do you happen to know what pins are 11 & 12 on the transformer? I have not been able to find an accurate pinout spec for it.
I do believe the Volt Regulator is...
Hello, I have a MEP-806A Generator that will start and run, but not produce any voltage when holding switch to start or releasing. I have a contactor trip under voltage light illuminated. I did the 4.1 voltage regulator test, from the TM, and determined that the transformer may be the issue, as...