Search results

If i leave it in 3 oclock, Gauge's work. flip switch to closed loads, will come on if there is a change on load; i.e. add or remove unit trips on short circut or if i turn s6 it will trip on short circut. if i leave s6 in 9 oclock, unit will run normal loads on and off with no short circut

Nothing on L2 have to leave s6 on it or i get the short circut light

I set unit with hand held meter under load set to single phase 120/240 and getting power on L1 and L3

Yes i am going to check the wiring on s6 next then pull switch apart to clean it .the only way i can get unit to run with out droping out power on short circut is if i leave the s6 switch at 9 oclock or l2 if i turn the switch when unit is putting out power short circut

It moves but I haven't confirmed with handheld meter of how much it's actually drawing to see if it's accurate.

No i am pulling 120 from L1 and L3 S8 set to 120/240 single phase

Thank you will get back to this weekend. IF i leave av-am switch at 9 oclock on L2 setting will the overload and short circut still work? I am running unit at 120/240 single phase

K1 is ok have found unit goes out on short circut when turning the am-vm and if i leave swicth in 9 oclock i can turn loads on and off with no short circut light coming on and power staying at terminal lugs going threw s6 switch to check wires cant find a diagram with wire ids on it you any one...

Found Some toasty terminals on k1 should i replace or is that normal going to clean them up then reinstall unit

Ok cleaned every thing gauges are reading better. But when i close ACI switch short circut light comes on. When i close ACI switch hz goes from 60 down to 57 hz only when load is on unit no change with out load. Looks like s8 and k1 have been replaced along with voltage regulator found magic...

Ok i will get a can of deoxit 5. Clean all the contacts, cubes and switches. Thank you for the help i will get back to you

So give you some history. Unit works fine untill theres a change in load added or Removed. Relay opens and short cirucut light and sometimes over load light comes on not at same time.Convenience plug works just fine. I dialed voltage and hrz in with hand held meter gauges on the unit are off on...