• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. E

    ADDING 25KW SINGLE PHASE TRANSFORMER TO MEP-005A

    that is what i thought thank you very much for your help. you have given me things to think about and i appreciate it.
  2. E

    ADDING 25KW SINGLE PHASE TRANSFORMER TO MEP-005A

    would i adjust the rheostat to 208v or 240v or somewhere in the middle i am assuming 208 but just checking
  3. E

    ADDING 25KW SINGLE PHASE TRANSFORMER TO MEP-005A

    I think i have a much better understanding after reading these messages. this has really been helpful and very informative. it sounds like a 3 phase panel might be the best way to balance out the load between the legs. I think the lightbulb came on. that gives me 120 and 240 balancing using the...
  4. E

    ADDING 25KW SINGLE PHASE TRANSFORMER TO MEP-005A

    it is 3 phase and takes about 50 amps but will not be running during the time we want power from generator
  5. E

    ADDING 25KW SINGLE PHASE TRANSFORMER TO MEP-005A

    I am somewhat confused here are some photos from the generator. we want to keep it easy when we set it up to produce RO water . the cable going to the RO from the generator goes to a breaker panel that can be shut off. that allows whatever we tie to the generator lugs will be dead going to the...
  6. E

    ADDING 25KW SINGLE PHASE TRANSFORMER TO MEP-005A

  7. E

    ADDING 25KW SINGLE PHASE TRANSFORMER TO MEP-005A

    We know enough to be dangerous. by using 2 legs of the 3 phase for 240 would we be out of phase on the 240 and is that a problem in most cases?
  8. E

    ADDING 25KW SINGLE PHASE TRANSFORMER TO MEP-005A

    when we looked at the gen drawings it shows that L3 is tied to monitoring system and didnt know if that could cause a problem if we used L1 and L3 or use L1 and L2 to power transformer.
  9. E

    ADDING 25KW SINGLE PHASE TRANSFORMER TO MEP-005A

    single phase power 120/240v ac
  10. E

    ADDING 25KW SINGLE PHASE TRANSFORMER TO MEP-005A

    supplying power to other locations like pumping stations or cell sites during amergencies. we are part of Plan Bulldozer in the Midwest. Plan Bulldozer is part of the Heavy Constructors Association the help counties and muncipilities during emergencies.
  11. E

    ADDING 25KW SINGLE PHASE TRANSFORMER TO MEP-005A

    we have an RO that is powered by a 005a to supply water in disaster situations. without changing the wiring to the generator can we add a single-phase transformer ( ACME T2535183S primary 240x480 secondary 120/240 25kva ) to supply single phase power for emergency use. we would not run both at...
  12. E

    MEP-005A Question

    ADDING 25KW TO 005A TO PROVIDE SINGLE PHASE we have an RO that is powered by a 005a to supply water in disaster situations. without changing the wiring to the generator can we add a single-phase transformer ( ACME T2535183S primary 240x480 secondary 120/240 25kva ) to supply single phase...
111,167members
165,475threads
2,328,639posts
742online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks