Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Lately in 4wd the truck will erratically pull from side to side. It doesn't happen in 2wd so it leads me to believe maybe a bad hub? I'm really stumped as to what it could be. I have recently replaced the kingpin bushings. The truck is a m1028 so it does have the posi front end. Any suggestions...
I will post pictures after work of the trailer setup. We took the bed off of the cargo truck and mounted a fifth wheel hitch. When you haul a boat of decent length say 40ft you need to disconnect the trailer from the truck and lower a set of hydraulic dolly wheels on the trailer. Then you use...
So, I have a large hydraulic winch that I plan on mounting on the back of my 5 ton for hauling a hydraulic boat trailer up and down the launching ramp. I have done a little research on PTO options but haven't come up with much.. I see a few kits that are for sale that include everything...
Why hasn't anyone mentioned Optima batteries? I am running two optima red tops and would start the truck once every month this winter with no issues at all!
Have you already purchased a radio? I installed a marine radio designed for boats with a speaker in each door. The marine radio and speakers are water resistant which is handy for off-roading in case you ford water or have to hose out the inside of the cab. I'm sure quick disconnects could be...
I installed an inline coolant heater when we first purchased the truck (m1028) which definitely helped when starting in freezing temperatures . After replacing the glow plugs and installing new optima batteries it has started once every two weeks no problem down to -15f. It is yet to get colder...
https://www.youtube.com/watch?v=LO_Q6WyIpUU Most fun I have had yet with this thing! Eastport, Maine set a record for 76 inches of snowfall in roughly a month. I believe this is the first time i have had the cucv stuck. Sorry if there is a double post. I had issue posting it the first time.
I was just in the process of finding a local driveline shop online. I will try and get a quote from a place tomorrow. Lately I have been seriously considering swapping in an sm465 in place of the th400. This may just speed up that swap process!
That seems to be the issue! I will have to source a correct driveshaft and take the old girl off the road for a little while. I greatly appreciate you taking the time to take those pictures for me cucvrus and for all the help from the other members.
I hope it's the correct length! It's what was on the truck when we first purchased it. Maybe some soldier threw a shorter DS on prior to auctioning it off?
I have been struggling with a driveline vibration for some time now. I have replaced the u-joints in the rear drive shaft twice with no cure to the issue. The vibration is worst traveling between 40 and 50 mph when you are off the gas and coasting. There seems to be quite a bit of play, both...
The CUCV that attended the 2014 Ultimate Adventure has a winch mount very similar to this! Just watched the episodes posted on youtube this afternoon. It may be something to check out!
The truck is a 98 K3500. A relative has it down in Nyack, New york and the amount of salt they use on the roads down there has just destroyed the frame and almost every other body pannel on the truck for that matter. So I got it for a good price. From what you guys are saying it would be too...