Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
chassis suspension torque specs m1009
The tire lug nuts are 90 ft lbs, and I also found that some of the parts on the suspension and steering are 3/4 ton k20 parts, like the tie rod end on the pass side.
need torque specs for m1009, not the engine but the suspension and drivetrain. haynes manual does not like to cover the k5 for some reason, maybe its the same specs as k10?
Can't take out ball joints on front passenger side, because of u joint in the way of getting ball joint press in there. wondering if anyone knows how to get access to them, thanks.
bought zerostart 1500w tank heater, says to install in engine drain plug on bottom of engine, but thats blocked on both sides of the engine by the engine mounts. cant install in the radiator drain plug because its on the opposite side from the heater hose and at to sharp of a angle to run the...
my M1009 starts fine after it has run for awhile, but when you first start it you have to crank it with your foot all the way down on the accelerator for a few seconds, and if its cold (50 degrees or lower) it is a real pain,2 cranks or more, which is bad for the battery especially in the cold...
Just wondering if I can swap them out, the old one is gutted and leaky it won't even open, doesn't have a handle or anything. Wasn't sure if the new 89' one was different or not, thanks.