Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks but that is the cross drive manual for the M113A3, I need the transmission parts manual for the M113A2. The manual posted is 9-2520-272-34P not the 9-2520-254-34P, thanks for the post though.
Have a 1993 M998, everything seemed to run fine until I noticed an issue about a week ago after apparently the vehicle was left in the "run" position overnight. Went out the following morning and found
1) both batteries seemed to be dead. (1 week old correct military batteries (Aug 23...
If you want a 1 or 2 man turret, reach out to OSMWI in Carrolton GA. Gerald has one or two nice turrets that could work, just not sure of the exact ring diameter.
1) did M151 engines have casting dates on them?
2) did Willys M151s use Muncie (spelling) marked transmissions with the two yoke retainer tabs that are found on the 1962 and earlier M151s?
1) did M151 engines have casting dates on them?
2) did Willys M151s use Muncie (spelling) marked transmissions with the two yoke retainer tabs that are found on the 1962 and earlier M151s?
The rear shackles you mentioned are correct for USMC A1s (USMC did not buy slicks, but I bet they stole some). I would remove them as USMC A1s are horrible about rusting out under the brackets that held the shackles on the rear. and check/fix any rust issue before putting back on.
What is the correct inner tube valve number for stock m37 rims and military tires, tr75a work but the valve stem is pressed hard against the rim and takes a screw driver to pry the valve stem away from the rim to fill it. thanks in advance
I use a Dodge 2005 Ram 2500 with a 5.9 and a few intake and exhaust brake with a 12 ton gooseneck. I can/have hauled M113s with very little problem. (about 27000k trailer and vehicle combined). have a Class E license in Ga and have NOT FOR HIRE marked on the trailer. I skipp most weight...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!