Search results

Or print a modern engine block layout that LOOKS as close to the old original as can be but has has modern internals? ;-) The best of both worlds...a "Cumminified" multifuel?

nopics

It is a slight press fit, so maybe it is corroded on? Suggest to use penetrating fluid and let sit. Then try again. Put the puller on, put it under tension and tap the pulley gently with a big hammer. Don't go too crazy or you might break the pulley edge off. If no success, consider heating the...

https://ccsurplusparts.com/search?q=dump+bed+hoist+kit&_pos=1&_psq=dump&_ss=e&_v=1.0 Sent from my SM-G991W using Tapatalk

Shooting from the hip here, but your LDT pistons may not have an oil squirter at all. If they are later production, they will and you are good. If you really want to dive into the (very subtile) differences between LDT and LDS...

Well, that question has come up before: https://www.steelsoldiers.com/threads/deuce-is-there-a-difference-between-lds-and-ld-piston-and-liners.148700/ What I would say is that if you are rebuilding or refreshing the LDT , there is no issue with using six new LDS pistons and liners. If only...

The non-turbo multifuel is becoming somewhat rare. Cool to own one. If, for whatever reason, you absolutely have to have a turbo, it can easily be retrofitted. Sent from my SM-G991W using Tapatalk

@ToddJK I wonder whether what you see is wear of the HH. It simply does better on a higher viscosity fuel such as WMO, but loses too much pressure on the "thinner" fuels.

"This camper looks like a total dump!" This camper was designed to get teenagers out of bed in the morning. Modeled after Optimus Snooze in the (imaginary) movie franchise. This helps keep the camper shell totally level when parking nosedown on a mountain road. I better stop.....

I think we all go through stages of MV ownership. It always makes me laugh when someone comments on the "size" of the 2 1/2 ton. It is all relative. A drawback of the Deuce is that the bed is big enough to overload the truck. People are notoriously bad at math. When the book and design specs...

Might be wrong to ask in the thread, but where are we at with replacement injector lines? Still available from the usual suspects or better off going to a Diesel injection shop and have them made? It seems that, although the steel ferrules are available, generally the success rate of cutting...

You do not mention hard starting and low power, so I assume the injection timing is correct and not 180 degrees out. Simple things first - what do the fuel filters look like? New primary and secondaries and then re-assess. Yes, the filters can really cause super annoying running and idling...

It could be the lines/fittings. Taking them off, gently cleaning the "mushrooms" with emery cloth, cleaning the seats and replacing/retorquing the lines is a good step one. The lines are torqued to 25 ft lbs max. The center plug could also be leaking, giving the impression of line leaks...

Before you go all MacGyver heroic on it, make sure that it does not just need a set of Viton O-rings!

An M35A2 in low range is a terrific vehicle to teach someone how to drive manual transmission. Loud enough to hear what the engine and drive train are doing, enough torque to essentially never stall (and put off the trainee!) and slow enough to be able to concentrate on running five gears...

Most definitely NOT. You do the best you can, like we all do. Our trucks have ways to kick our butts. That is what they do. It makes us better at troubleshooting and inventing work-arounds!

@biscuitwhistler37 My comment about the dyno was tongue-in-cheek! However, here is what a 200 hp multifuel sounds like! :) My LDS just after the refresh (new rings, new mains and rod bearings, new heads and valve trains)

I think you need to get the Deuce dyno-tested to sort out the 4hp - 134hp - 167hp mystery! ;-) There is a chance it makes a full 80hp at the wheels! It is a good surprise to find out that they dropped a late production multi into the truck. Have you checked the transmission, too? Maybe it was a...

Is that an early one with the V8 or the 300Tdi?

The full seat may be a bit optimistic for the Deuce cabin size but if it fits, your posterior will thank you. I used a civilian air ride base with a military seat (Humvee) on top of it. You can see it here: https://www.steelsoldiers.com/threads/air-ride-seat-installed.170676/ Don't talk about...