Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I had a similar problem. The hard starting got worse over the years. Installed a check valve, blocked diagnostic sensor on fuel filter, installed electric fuel pump, then one day it started surging and a month later it would stall after 5 minutes. That was the last straw.
After extensive...
Would love to see that link you are talking about. Otherwise it will remain lonely because mine own eyes sees not a shred of 27SI manuals from Delco Remy let alone the isolated ground 27SI manual.
Would be nice. If anyone sees the link working, please forward it to us all.
Thanks
Where is that diode in the 1008 charging system.
I need to know where the diode is located that everyone is talking about is so I can finish diagnosing why I am not getting my Gen 2 to charge even though the alternator is in top shape. The problem in the wiring from beginning to end and I need...
Hi guys,
I sent a message to Warthog.
My problem is that when I turn on the key the gen2 light does not go on and I dont know if gen 2 is charging.
I pulled the 2 wire plug off the gen2 alternator and with key off, I get 24v on the red wire and 0 volts on the brown / white striped wire.
With the...
Gen 2 24volt bottom fuse, where is it located?
Where is that fuse? my Gen2 light will not go on and the bulb is good, the rear battery reads 12.7 volts. Am I missing something? I replaced with 2 separate alternators and got the same results. anybody have any solution?
Maybe Warthog?
You do not know what a rotor is for an alternator?
I am just curious, what brought you to this SS web site and especially this page?
I am just curious.
The rotor is the rotating magnetic field that induces a current in the stator windings.
If you have difficulty with this info, I recommend going...
Thanks cpf240,
Will do on the sticky notes.
I actually have a STE/ICE diagnostic box which I purchases many years ago to use on the M1008 and my 72 duce.
I just never hooked it up yet.
Thanks a bunch and I will post my findi gs after this weekend when I get back to it.
Thanks Warthog, cpf240,
Heater works great after I removed it and refurbished some of it as it was a frozen bearing case.
I didn't check anything (batteries or alternators), with the multimeter.
I will make a point to do that this weekend coming up.
Also I will check that voltmeter relay under...
I wanted to chime in if its OK.
Still related but different problem.
My GEN1 light does not light when in ignition/starting mode.
All batteries are fine, all alternators are fine.
Voltmeter reads nothing but I think its because somehow in the past I broke the capacitor that jumps between the...