Search results

misleading kw rating or not I wish I could find one on craigs list up here my other generators are lonely :P

After changing fluids and filters, I checked the strainer and reassembled everything. It starts and runs but I have a small fuel leak at the nut on the strainer. I tightened it up a little at a time but don’t want to over tighten / brake it. Does the copper washer need to be replaced, did it...

Hehe updated the text color :)

First off thanks for all the info in” MEP-003A hook up question” thread. Based on my understanding the easiest way to be able to use the 002 stand alone in the shop / mobile power and as a backup to the house is Non SDS (keeping the “neutral wire is bonded to the frame of the generator, and the...

Hooo whooo finished flushing the fuel system and fired it up, after some smoke and sputtering it fired up :D Let it run for a few min to check the hz and volts 60 and 120.2 :) Shut it down and noticed a small fuel leak on the nut to the fuel strainer ... no to fix that check oil pressure and...

Finally got a little time to tinker. It turns over nice and easy. I got the drain valve un plugged and flushed some fresh fuel through it. It looks pretty clean and it’s not leaking, now to replace the fuel filters J

Finally got a little time to tinker. It turns over nice and easy. I got the drain valve un plugged and flushed some fresh fuel through it. It looks pretty clean and it’s not leaking J

Cool thanks for all the info. I'll try to turn it over by hand first then I think the Caswell product looks like a good solution. I'll post up my findings on if it turns over

I'm working on getting a new to me 002A up and running. The hour meter says 11 hours J hope its accurate. Look clean overall. I’m going over it wanted to start with fluids and filters. The fuel tank has a plugged drain valve and some nasty rusty looking fuel in it. Any recommendations on...

Hi, I just got a 016D (50 hours on it :)) I'm trying to find the oil / fuel / air filter part numbers? Based on what I've dug up on this site so far it has the L70AE-DE motor. It starts runs and makes power but I want to give it new fluids and filters before any extended use. :) The Hertz...