Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
this is a picture of the door handle i am in need of, mounting tabs broke on it. as u can see, it does have a lock in it....DSD277, so your saying these door handles are not available since they haven't been DOT approved yet?
yea i got a buddy with one. so your saying that there is no way to know if its the alternator or the voltage regulator without having a good regulator to troubleshoot with? well what if i didn't have another regulator? i wouldn't want to spend money on an alternator if its just the regulator...
Im trying to find a door handle for my M1083A1 MTV. its the newer style MTVs. its tan in color. i have already looked in the 365, 366, and 477 parts manuals for the older mtvs but those have a different style door handle which opens when you pull up, but the one i need, you pull from the side...
so whats the proper procedure for changing transfer case ranges? put in neutral, then shift transfer? after switching the range for transfer case, do you have to put it in reverse at all before you it locks in? because ive had it before when i would change from H/L to H and i would put it in D...
hey guys. i got a M1097 HMMWV with 6.2L engine. something is going wrong with this thing and cant really pinpoint what it is. when you want to steer sharp left or right, the wheels lock up. feels like front are locking up, when it locks up, i can give it more gas and the tires will chirp. i...
Hi, i got a M1097 and i have a charging problem. Batteries are good. Voltage at positive terminal on alternator is 23.89V and same thing @ the voltage regulator. My question is how do i tell if its the alternator or voltage regulator that is causing this low voltage problem? Thanks for looking
i have a M1097 HMMWV and it had a problem with the wait-to-sart light not coming on and the glowplugs not working at all...i troublshot it and it led me to a bad glowplug controller because i had continuity on pin a and b from the engine harness pcb connector. Now i put a new glowplug controller...
i did disconnect the batteries before changing. battery voltage is good and have good cold cranking amp measurements. but i took a pcb box out of a m998 hmmwv that had the same pcb box and it still did the same thing. it was working on the m998 but not my m1097...could the engine temperature...
i have a M1097 HMMWV and i have a starting issue with the glowplugs. I would go to start it, after letting wait light go off, then id crank it and it would just crank and wouldnt fire until i had someone hold there hand on the exhaust and then it would start rt up when cold. i started...