Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I'm troubleshooting an issue we have with a M927 that will not engage the front axle. I've been looking at the TM troubleshooting section for the front axle engagement but without a good way to attach an air gauge I've been going off of the fact that I do feel something happening when air dash...
You should be able to get them made anywhere that does alum stepdeck ramps. I used http://www.hdramps.com/ to make them for much less than I could have purchased the materials. Took about a week from order to my door on custom ramps.
We did a test patch for both linex and rhino. It works very well if you are going to do a frame off coating. However this unit was in excellent shape and has a coating underneath the carc which both linex and rhino would not adhere to without complete sand prep. Something that is very hard to...
We have elected to not use lowrange in reverse at all by affixing a sign and training. But in high range going thru the parking lot steering side to side I don't notice a difference and assume it is not engaging.
I believe our 6x6 operation isn't engaging. I do hear air being applied and released but there is no change in driving it around. Luckily our lights all work and the driving lights have already been upgraded. We will also be adding our standard emergency lights in 24vdc version along with...
We are putting a M927 into service at our department for a All-Terrain Rope Rescue truck (Rope equipment and 2 Ranger UTV's). Currently its CARC tan with very little rust. I've seen behr paint mentioned but for our application we are going with standard flat white for the cab and black for the...