Search results

Does anybody know what the torque rating is for the T-1138 transfer case?

It won't add 28". Just rim and spacer thickness, as the inner wheel is reversed.

No rust on the delivery valve. Was good fuel, and just had oil change done.

I hold the shutdown solenoid in the run position, and when I move the throttle shaft, the rack doesn't move. It stays in the shutdown position. It won't start as well. I move the rack with a screwdriver, it runs. The rack acts like it's gummed up. I can move it back and forth, but it's stiff, or...

Yes. I pulled the hex plug out of the top of the governor section. The rack doesn't move with the throttle lever, and it moves rather sluggish with a screwdriver. Was running fine, new fuel. It just sat for two years, and viola!

If I have to year it apart, I will. Just trying to avoid that.

It's something on the fuel side. Ty.

I will let the mechanic know that. Thanks.

Does anyone have a fix for an 8.3 injection pump rack that is sticking?

Agreed, just latex is so soft and I just want to spot in where needed. So far the flat camo paint from tsc, matches pretty good. It just is cost prohibitive. Thanks.

Why does it seem like many people are using behr latex paint on their trucks? Does anybody make enamel or acrylic paint that can be used?

All set. Thanks for the knowledge. I had a continuity issue.

Thanks. The gages all work. All new solenoids, got rid of all the electronics in the PCB. I will check tomorrow and see what I find. Again thanks.

Yes the one fuse under the dash blows when the power is turned on, and the antilock light is on, as well. Unrealted to this issue. Thanks.

The truck starts just fine. I already changed solenoids. The tag number is 37 87

I installed some lights from a wire under the passenger side of the dash on my 91 923. I was installing a bulb and the socket shorted out. Now I have no power. I turned off the truck and nothing reset. Can someone please tell me where the breakers are.

I live near Utica, and am willing to take a look.

In the plumbing of my trailer air hoses, I have a double check valve feeding my trolley valve, so the side with the greater pressure will feed the valve. In the back of the truck, I put in a secondary double check valve to feed the trailer. This combines the foot valve and trolley valve, so the...

Thank GOD, nobody was hurt. Anything can happen on the road.

I was wondering if there are any wires just capped off to tap into, but thank you for the info.