Search results

I have a brand new set up for a 002 I never used if interested send me your email address I can send you pics, Thanks john

I always use just a pallet jack to move my gens, 802, 803, 003 all I do is take some 2x6 boards screw them together, lift the gen and slide the boards under 1 side at a time, it is actually pretty easy, then I put a lag bolt on each side of the frame to hold them in place. I used to use casters...

Thanks for the help

will running the 802a or 803a be ok running with no batteries at all installed?

I recently saw a video where a guy jump starts his MEP 803 with a 24 volt jump pack, he has 2 remote starter terminals installed under the slave plug. He says starting this way saves on wasting money on batteries. My question is does anyone know if it is safe to run the MEP 803 or 002, 003's...

I just ordered the brass fittings from Plastic Mart if you call them instead of going through the website the shipping is much cheaper 866-310-2556

Thanks for finding a great alternative, I agree with not wanting to fix junk with junk.

Yes I realize, but it is an option, at least that is what I thought

I found a company http://www.lexingtoncontainercompany.com/Nato-Jerry-Cans.html, that seems to have authentic brand new jerry cans, worth checking it out.

Thanks for all the help. It sounds like it is an issue with the pump timing, I will be working on it this week and let everyone know how I make out. Thanks for all the help so far, you guys are the best.

Ddmk18 yes the valve cover gets very hot after running it a few times How do you check and adjust the timing of the injector?

Isaac-1, Yes I get good fuel return to the tank, it is not a solid stream but it is a steady flow, is it supposed to be solid or a weak stream back to the tank?

Keith J I have fresh fuel and the tank is brand new. I am using an external pump from another unit and not using the ones on the unit because there may or may not be an issue with them working properly. What drives me crazy is how it runs the first time the longest and after that it will not...

R Racing, I did check the valve and it seems to be working and clean with no issues

Jamawieb, I would welcome any help you can give me

I have an MEP-002a that was reset and had 2.8hrs on it. I have tried to get it started numerous times, it will run the first time for about 2 to 3 minutes then gradually starts to die. If I run it after the initial 1st time it will not run for more than 1 min almost exactly 1 minute. I have...

There is a guy on here named Walt from RI, he used LED strip lights and mounted them to the top of the control box above all the gauges and it is very bright, I believe he said he used a ac to dc converter or vice versa, plus it was very inexpensive

try going to LEXINGTONCONTAINERCOMPANY.COM see if you like the ones they have

Ike, Thanks that was the type of list I was looking for. Can you explain how to prime and bleed the injectors if needed? thanks John

Can anyone list the proper procedure from start to finish on the best way to get a new MEP-003a which arrived with no fluids or batteries from GL ? I want to make sure I don't miss some little step that may be critical.