Search results

Wanted !! Data plate wanted for my semitrailer, shop van m146. The ine above the receptacle, fixed with 2 thumbscrews. The only one thats missing on my trailer. Anyone any info were to get it ? Thanks

Hi, yes, with the screws out you should be able to pull off the bottom part ( the part with the output line and the screen, and the magnetic disc or some sort sits also in that part...

I think you mean Pirmasens was that town. There are a number of nice photos on internet about that place back in those days. There is also a facebook page specificly for those who were stationed over there.

Thank you !!!

Hello guys, i have a 6 ton semi trailer to put behind my m275a2 truck tractor. I am sanding the semi trailer at the moment and i find out that the trailer had many layers of paint, from woodland camouflage to some tan desert color paint. On the sides of the trailer, in the middle, left and...

what unit was that ? i assume those were mainly uh-1 helicopters ? was the crane truck painted entirely yellow in your unit ?

it took many hrs and a lot off patience but i finally was able to convince her... hahahaha the 5 tons (m62 international) were frequently used in belgium and the netherlands mainly for handling missiles like the honest john.

i cant imagine why they should use a crane truck on a flightline, a tanker truck i can assume, but a crane ?

Hi guys, i purchased recently a studebaker m108 crane truck, 1954, still with the oa-331 gasser in it. Under the green paint i found some airforce blue but under that the entire truck is yellow, and i mean the entire truck, i've never seen trucks painted yellow when in service. Anyone can...

UPDATE !!!!!! new pump installed.... correct fuse in it... no more problems However... the old pump had the 24vlt wire directly on top, non removable... the new pump had a connector on the top side (push/turn) like the older model douglas connectors so i had to improvise... its working for now...

Hi guys, finally took out the fuel tank, drained it, took the pump out , cleaned the screens on the bottom, tested it in some diesel, it gives good and fast diesel. the main reason i took the tank from under the truck was to check on my fuel pump, there was no fuse in it, so i always started...

Hi , is there anyone who remembers or knows what the original colour was inside the shop van trailer ? it has the very light green now, but under the paint there is bright yellow around the windowsfrom the rear doors and the door on the side. Is it some sort of indicator for emergency exit ...

Thats the weird thing with mine, with the in tank pump not running and thus not delivering, it starts and runs without any problems. When bleeding the filters with only the in tank pump running (not starting the truck) no fuel is coming out (on the top of the secondary and primary filter)

Hi guys, recently i found out that the fuse for the fuel pump in the tank is blown. However the truck is starting and running perfectly fine, (when cold it takes about 25-30 sec to start up and idle). when i override the fuse , The pump is working (turning) when powered ( as well with...

Hi guys, today i picked up a ladder from a local auction. After a quick search it appears to be a rear boarding ladder for MRAP vehicles. Now my question is if anyone knows what are the panels used for, they flip open towards the steps. Looks like it can be used for attaching some tools or...

i also had no handles with mine... lucky i found a couple nearby, however they came off US semi trailers, they were to long and i had to cut a piece about 4 inches out and weld back together.

will do that but for now i have an other one here, so i will install this one and do the modification later. however i still dont know if the entire brake system shoud be bled or just the airpack alone after changing

ooohhhhwww yes, i didn't even think about that lever on the steering column....!!! Thanks!!! so the lever goes via the switch, air controlled, that's under the gladhand tower behind the cab together with the brake pedal, and the hydraulic switch is only activated by the brake pedal.

hi guys, i replaced my rear lights, on my m275, i found out that my hydraulic stop switch (at the end of the long style airpack) is not working. i removed the connector and measured between the 2 contactpoints, 25 volt is present, i tried to measure between the 2 tips on the switch itself when...

Hi guys!! i have european light brackets installed on my m 275 nut no lights are there, only a wire, i found two diferent types, picture 1 &2 there are lights whith one orange lens and opposite a red lens ( so front and back are red and orange, together they form the housing) and the other...