Search results

I have an M886, and I love it! It had a bad crankshaft, and the patient compartment was gutted out when I got it. I rebuilt the engine, went over the wiring,rebuilt the brakes, and ultimately found the patient compartment interior. The rear compartment gasoline fired heater is functional. My...

M886 Ambulance heater Hey! Thanks for your reply. I'm very close to getting it working. I picked up a NOS heater from Saturn Surplus, problem was, you also need the install kit to mount it. A local friend has a M892, kind of sad derelict that will never run again, and I got measurements from...

Hi guys! I have a few questions concerning the fuel fired heater in the rear patient compartment, of the Dodge M886 ambulance: 1. Looking at photos, there is a top flange, and bottom flange where the exhaust pipe goes through the floor. Looks like there is a 3" ring welded to the top...

On CUCV's and other military vehicles where the military used silicone brake fluid, can you just replace a brake system component-wheel cylinder, caliper, master cylinder, brake hoses-with a factory new unit, bleed it and go on, or, do you have to disassemble the new component, wash the factory...

I'm restoring a 77 M886 ambulance. I'm working on the heater installation, and have questions concerning what goes where.( my rear compartment was gutted) Anyone have an ambulance with the heater installed, and intact? Better yet, does anyone have, or know of any m886 parts trucks? Thanks!

Thanks for the replies! I'll check out Ebay and try to find the guy selling the paint. By far, I think Gillespie makes the best military enamel paints. I have used many, many gallons of WW2 33070 over the years. It goes on well, dries nicely, resists wear, and generally holds up well. It has...

Hello! I'm trying to find a gallon of original Army camouflage paint, lusterless enamel, Light Green 34151. Anybody have any or know who might? Thanks!

The factory interior of the Dodge M886 ambulance patient compartment is white. I'm trying to nail down the Fed paint number, but I believe it is Fed. Std. Insignia White, 27875 (semi gloss). Interiors of aluminum vehicles- Chevy M1010 ambulance for example- M113 and M114 APC's, and aluminum...

M886 Ambulance Interior Color The factory interior color

That makes sense. I've run the part number and found the exact plug. I'll install it and it should be ok. Thanks1

Does anyone out there have a 318 intake manifold out there from a M880 that they can look at and check something for me? Specifically, if you look straight down into the manifold, you will see a specialized pipe plug-- ,or a threaded, seated hole for a pipe plug. On my truck, there is no pipe...

Transport needed for a 1/4 ton M416 trailer from Eureka, Nevada, to the east coast, preferably the Pa. Ohio, NY-NJ area. Also, does anyone have experience with the on line posting boards that truckers use to find smaller filler loads, and how do you find these boards? Thanks!

The 5 ton family with the ENDT Mack-what a truck! I had a M54A1 cargo, Mack powered- lots of power, when you would goose the throttle, it would rock like a performance car. It was 05B29069, ex- NJ Guard. Ten years later, I owned M54A2, LDS 465 Multifuel-a dog. BUT, it was 05B28969--consecutive...