Search results

The ground sounds suspect. I'd spend a little time verifying that is OK.

Did you check the NEG side to ground? How do the pins look? Are they all in place and none pushed back?

OK. Those are not true phase converters. They use capacitors to "fake" it. Those won't work with electronics.

The amp rating looks good. I don't know enough about that one to know the quality of the power output. It has promise.

Do you have 3phase power available? If not you'll need to get either a rotary or solid state phase converter to make it work on single phase power.

Kurt is already replying to the thread here. I'm sure he will drop you a PM since you don't have enough time on the forum to send messages yet.

If you do need a DCS, Kurt has a couple available. https://www.steelsoldiers.com/threads/mep-1030-1070-dcss-pn-04-20442-nsn-6110-01-588-4725-tested-see-video.223023/

Have you downloaded the TMs yet? https://www.steelsoldiers.com/threads/mep-1030-1031-ammps-5kw-6115-01-561-7329.158371/

Be sure to get the updated DC schematic. https://steelsoldiers.com/threads/mep-802a-mep-803a-wire-lists-and-annotated-dc-schematic.220870/

I use the U1 size and replace the battery cables with ones that fit the bolt through battery lugs. I only use this for my personal machines.

+1, its not a 480v generator. Its 416v.

They are IEC 60309. Here is some reference info - https://en.wikipedia.org/wiki/IEC_60309

Are you looking for something like this?

Glad things weren't destructive on your end!

David was taking that one to someone in western NC. Kinda wish he was leaving it with me since it was charged with MY diesel fuel! :D I have been working on mine at home. I went the DIY route with cells and battery enclosures. Its been online for a few weeks now and working well so far.

No doubt. I didn't want to talk about any uses that involved things such as missile systems on a youtube video. All it takes is someone reporting the video and youtube will demonetize it. We decided to keep it kinda vague.

I swear I recognize those guys. :D

Thats OK, we can help you get going. For these parts we have a quick reference at the top of the forum: https://steelsoldiers.com/threads/mep-802a-mep-803a-filters-and-parts.186068/ The water separator filter part number is right there. If you ever need to find the part number for an item...

Get TM number TM 9-6115-642-24 from the TM section on this forum. Page 39 shows the parts breakdown of the unit. Refer to item 3, fuel water separator Page 51 shows the fuel system schematic. Page 421 shows the water separator I don't know what else is missing but that part is a simple spin...

61.5hz unloaded is the standard setting.