Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Is there any serial numbers on the starters to check if its 24 or not i didnt see anything on the bottom end of it looking at it i would like the keep the 24v cuz i have electric fans and it draws alot of power.
coverting to 12v whats needed
I have the 12v starter someone else changed out, resistor for glowplugs are bypassed, i have both alternators still wired for 24 what one do i remove can it be the passenger side and how ? And i have a doghead relay do i have to splice the purple and purle and...
i looked at the starter and i believe its a 12v starter its hooked straight to the battery also, glow plug resistor is bypassed now to. i have a dog head starter relay since im getting everything to 12v now should i tie the purple and purple and white wire together and if so what terminal on the...
Second battery tray is missing along with topa that hold the batterys down have one front tray closest to grill and ithe batterys straped to it and the tray is kinda rusty and sketchy so mabe ill see if its a 12v starter and go from there mabe convert to 12v cuz putting it in the bed sounds like...
Since the battery i have in it now is already hooked to the bus.bar both neg and postive cant i just have the battery in the bed ran positive terminal on battery to the neg bus bar in cab and vise versa and it be in series cuz the bus bars are connected already straight to the battery?
Yes truck still runs fine it just starts very slow since its only getting 12v and my glowplugs get like 3 volts cuz the resistor on the fire wall is cutting the 12v in half thats why i wana get another battery so its back to normal, takes like over a min of holfing the manual glowplugs down to...
just bought a m1009 a couple months ago it only has one battery in it right now, i checked and everything is still wired for 24 volts just missing a battery, i would like to put the second battery in the bed of the truck and power it through the power strip mounted inside the cab on the right...