• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. Trackiron

    M76 Otter pics and information

    Like the use of chevy HEI. THere are mag rebuild guys out there but thats clever. Tracks of these are some of the easyest out there to replace. Go to WWW.EXTREAMEHAGGLUNDS.COM and watch the video "track building". This type of track works on snowcats and other vehicles too. Its the...
  2. Trackiron

    M76 Otter pics and information

    I think I still have the TM - Ill check tonight. I also just found an Otter in California that has the rear cab cut off(Pickup style). Guy that owns it does not do email, text or computers. You will have to be able to go there in person if you want it. PM me if you are serious.
  3. Trackiron

    M1070 Tech & Tips

    If you could let the government know to clear my EUC - maybe I could get my HET.
  4. Trackiron

    Kenworth ICBM Missile hauler - Help ID this part

    Thanks - still have the truck - had to convert to 12v.
  5. Trackiron

    M1070 Tech & Tips

    Here is the section that refers to the battery, starter, ect. http://miscpartsmanuals2.tpub.com/TM-9-2320-360-20-2/TM-9-2320-360-20-21407.htm Here is links to all the pages: http://miscpartsmanuals2.tpub.com/TM-9-2320-360-20-2/index.htm
  6. Trackiron

    M1070 Tech & Tips

    All the manuals are posted on here - have you looked through them? THe front of TM9-2320-360-20-3 has a bit of troubleshooting but its a preface to the engine controller. All the manuals are also at: www.liberatedmanuals.com/ I will try to find the one that contains the schematic.
  7. Trackiron

    M1070 Tech & Tips

    Wiring tied together somewhere between the 12V and 24V?? Is there a way the 12 v can be disconnected or isolated and then check the 24V on the truck? all my other MVs are 12V or 24 V only. Also a large load can pull an alternator "down". From your last post(ran it for a while, turned it off...
  8. Trackiron

    M1070 Tech & Tips

    Well you are welcome to see mine here in PDX if you don't make it that far south.
  9. Trackiron

    M1070 Tech & Tips

    Can you tell us what you are doing and in what state?
  10. Trackiron

    M1070 Tech & Tips

    No one has covered, in this thread - that I have seen, insurance and drivers license requirements for M1070 on public roads. I just bought one and am trying to figure out what kind of trouble I'm into. We intend to Haul a M18 and/or M60 tanks with this beast(No the tanks aren't mine - Steve...
  11. Trackiron

    Kenworth ICBM Missile hauler - Help ID this part

    This is somehow supposed to be connected to the battery and the starter in the Kenworth ICBM hauler we are working on. HELP
  12. Trackiron

    Yet another Bobbed Deuce

    Finally got a pick of the truck while I was unloading an M76 Otter. Still need to get mud flaps installed and a long list of little things.
  13. Trackiron

    Yet another Bobbed Deuce

    Pics of the arm installed on my truck. Note that the air assist cylinder now has the proper horizontal position again. I made a 4" Lift arm for user "TOXIC" waiting for feedback on the install of the arm on a show truck they are doing. So far there is some possible bump steer issues...
  14. Trackiron

    M76 Otter pics and information

    Another Otter home. No problems getting across the Canadian border - Helps to have no engine, transmission, or fluids . Got some great parts for my M116 too.:smile: This Otter is in excellent condition inside and out. Once again - No track. I am going to pull out all the otters for a group...
  15. Trackiron

    Question for bobbed deuce owners using the original box?

    Yeah - Better have a lot of time, face shield, and wheels available if your going to do it with abrasive cutoff. Sawzall gets in a bind too much... SOme the the structure is 1/4" thick in there. Tip for those who don't know or havent done this yet. If your going to use a flame to cut, for a...
  16. Trackiron

    M66 ring mount installation pics. Warning. A lot of pics.

    I have never seen picture of how to get into the ring mount once it is installed. I think you stand on the back of the passenger seat(diamond plate when flipped down - but what about the top? I have the ring mount canvas covers to cover the ring but there woudl be no 'seal' between the roof...
  17. Trackiron

    Yet another Bobbed Deuce

    8" lift - bigger is better! Like to see what you come up with too. Thinking of adding steering stabilizers to help elinate death wobble - Checking all the standard stuff first. am not running any shocks at this point - suspension seemed so stiff it doesn't matter - any input on this...
  18. Trackiron

    Question for bobbed deuce owners using the original box?

    I did another bobber - this time I cut the front of the bed off - took out 34" of the bed and welded the front of the bed back on. This was a lot less work on the bed but the bed mount positions had to be adjusted. Fixed with some angle iron. .. I will add pics later. Bottom line(my opinion)...
  19. Trackiron

    Yet another Bobbed Deuce

    I knew I wanted the biggest - baddest stering arm out there. The high steer arms I found on the market for sale work with the passenger side - wont work with air assist steering and they also dont include the tapered hole for the cone locks which I wanted to ensure elimination of any play in the...
  20. Trackiron

    Yet another Bobbed Deuce

    FInally getting back to finish the project - 2 years - really!!!???? Added the air assist steering to improve steering - not really powerful enough to overcome the XZL tires. The other problem I had to solve was getting the steering ball joint and arm high enough to accomodate the 6" lift I...
Top