• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. G

    how to rebuild m934a2 air windshield wiper - 939 series

    Yep, that is my solution for now. Leave the working one on the driver side and plug the other one. Sucks, I hate doing that for an extended drive but hopefully it wont rain and all will be good. When I get back, I am going to swap to electric. That has always been the plan but those little...
  2. G

    how to rebuild m934a2 air windshield wiper - 939 series

    When I get back, NAPA will be able to get what I need. They can't get anything here by the time I leave for vacation. Anyone at all ever pulled one of these apart and got it working again?
  3. G

    M934A2 Alternator Swap Verification Question

    One more, hopefully, question. Would it hurt to run an additional (heavier gauge) wire from the alternator output to the starter? I would think that would help with amperage going back to the house batteries. I want to keep the wiring going through the PCB but still have full amperage from...
  4. G

    how to rebuild m934a2 air windshield wiper - 939 series

    Has anyone ever rebuilt the air windshield wipers on these 5 tons? My passenger wiper is leaking air out of the exhaust port, continuously. It drains the primary tank in about 15 minutes once I turn the truck off. I opened up the wiper motor in question, (took the top piece off where the air...
  5. G

    M934A2 Alternator Swap Verification Question

    Looks clean. Nicely done. Is that a hot cable running directly to the starter from the bottom alternator? Where is the top alternator's hot wire going? Just curious. It looks like you have the 568 wire (the one with the waterproof plug) connected. Is that the "current output wire" you are...
  6. G

    M934A2 Alternator Swap Verification Question

    l am converting my M934A2 into an RV. I have already swapped the four starter batteries for two group 31 batteries. I have run 4/0 wires from the batteries back to the rear of the Van portion to charge the house batteries with the alternator (I also have a battery isolator/charger inline). I...
  7. G

    Transport 30K Excavator from Chesterfield Virginia to Bonners Ferry Idaho

    I have a Case CX135SR excavator I purchased in Virginia. Looking to see if anyone can help get it back or suggest a reasonable hauling company/agent. Item stats: Weight: 31,000 lbs Length: 23'9" Width: 8'6" Height: 9'0" It is ready for pickup as soon as possible and it can take however...
  8. G

    Fuel tank accessories for M934a2, duel tank setup

    I purchased a secondary tank for my truck. The sending unit is toast and all the other lines are cut. I also don't know specifically what parts I need to convert to dual tanks. Has anyone done this and know what parts I need to purchase? I found some parts but I am unsure so I am looking...
  9. G

    ID Class C RV Insurance Suggestions

    I wasn't sure if the commercial insurance would work since it is registered as an RV already. I will give them a call though. Thanks.
  10. G

    ID Class C RV Insurance Suggestions

    Looking to get my 1992 M934A2 insured as a Class C RV. I already have it registered with the state as a Class C RV but so far nobody wants to insure it. Anybody have suggestions on which insurance might cover it? BTW, I converted the cab/van portion to a walkthrough. Hence, Class C.
  11. G

    mep 803a stopped on its own, wont turn over via main switch, has battery power

    Not showing the capacitor in the schematics is not necessarily Bad but it is an unknown and unknowns make it more difficult to troubleshoot an issue I (for those of us who do not normally work on these or similar items). It seems to have been installed during a reset at Letterkenny so they put...
  12. G

    mep 803a stopped on its own, wont turn over via main switch, has battery power

    I am going to assume since you looked at the TM, and didn't mention seeing a capacitor, it doesn't show one? :) I rotated the new alternator housing 180 degrees as suggested, installed it as is (no capacitor), and it is charging the batteries and putting out 28volts. I don't think the old...
  13. G

    mep 803a stopped on its own, wont turn over via main switch, has battery power

    Hmmm, so maybe they started putting the capacitors in around 2010? The -24P I have is October 1996 version. It is the one I got off this site so I imagine everyone is using the same older TM. I wonder if there is a newer one that was made or had a posted change done around 2010. I'll have to...
  14. G

    mep 803a stopped on its own, wont turn over via main switch, has battery power

    I will need to rotate the rear. It will fit as is but the regulator is upside down.
  15. G

    mep 803a stopped on its own, wont turn over via main switch, has battery power

    Yes, the top part number is the alternator I ordered and received. It did not come with the capacitor which was the reason I was asking. I did not see it in the 24P either. Sooooo, I guess that means we don't know why Letterkenny put one on the original (to me) alternator. It seems the...
  16. G

    mep 803a stopped on its own, wont turn over via main switch, has battery power

    That may be Guyfang. I simply used the alternator information that is/was installed in the generator to order the new one. The original alternator has the green over-spray paint they used on the tier two reset they did back in 2010. The regulator on the back has the same model and...
  17. G

    mep 803a stopped on its own, wont turn over via main switch, has battery power

    I am not finding a cross reference for the capacitor that is on the alternator. Leese Neville shows capacitor part number as: 0844474C02S I called auto zone and napa and they do not show anything on the part number or name. Has anyone needed to purchase a replacement capacitor and/or do you...
  18. G

    mep 803a stopped on its own, wont turn over via main switch, has battery power

    I tested the alternator. No go. It is dead. I ordered a new one. $127 including shipping, from the UK. The only thing it needs is the pulley and a capacitor. It is an exact match. I'll let you know how it goes when I get a chance to install and test it. Thank you for the help. I also...
  19. G

    mep 803a stopped on its own, wont turn over via main switch, has battery power

    Thanks. I live in a very rural area. No alternator shop is close unfortunately. Sometimes living rural, you gotta pay extra for what you want. I choose to live here anyway. LOL. Your help is appreciated.
Top