Search results

as far as the resistor it looks to be in great shape. no burns or visible damage. I just don't understand why I was getting 24v at the relay and the plugs? I am going to try and get a relay I know works install it and see what voltage I get that will tell me if mine is bad.

I went to the two post terminal block and used ac 60g plugs, works for now will keep an eye on that battery. Thanks for all the info.

thank you

Ok now that I figured this out (look at page 2) one last question. Can I run a 10 gau wire straight from the negative post of the battery closest to the firewall (this is 12v) straight to the relay and still have the card control the plugs, totally bypassing the resistor or will this disrupt the...

my posts are not showing up ?

rtj

posts not posting lets see if this works

they were 070 with thin spades. I got them from INDUSA. they said they were the exact ones the military used

I pulled the resistor off the wall ohmed it from the nput to the output and got no resistance, actually i got true continuity.

the plugs themselves are seeing 24 volts with the relay cycled on or off. I put all new ac delco 50g's in it and it started fine for about four months. Then I thought maybe the ac plugs weren't good enough and ordered well plugs and every one of them are dead. I got them all out (alll slightly...

I am getting almost 25v at the relay and the glow plugs, I'm i correct in asuming the resitor is bad, and if so does anyone know where I can get one. I would like to replace this rather than go to manual. any help?