Search results

Parker 831 doesn't meet the temperature spec. 836 is a reasonable general purpose alternate to the gates # I provided at first glance... As for my promised follow-up post the hose that goes from the output of the Cadillac valve to the Fan shroud I used gates 4C5C which meets up to all the...

Year+ too late, but in the interest of good information I'll throw in $0.02 on this parade... HMMWV power steering return hose 6490610019 is similar to J189 spec, but has a slightly extended thermal rating of +150 deg. C on the high end. It calls out a working pressure of 250 psi, but that is...

Can anyone advise the proper dipstick and tube combination for DWF install on a 4L80? The M1114/M1151 TM is incorrect for these. The tube and stick combo as specified are not a matched set and are not compatible. Trying to avoid purchasing one of everything until I get it right. Thanks in...

Finally got around to finishing this up. With the help of a local machine shop here are the spacers I came up with. Since rear axles have been a bit expensive and hard to find surplus NOS, I bought a couple more fronts and some rear axle rebuild kits for a lot cheaper. Ended up with just enough...

Finally got around to finishing this up and felt to post a follow up. Scrounged large flange 12K axles and finished up the front end last year. I wanted to have a spares kit anyway and could buy 12K fronts all day for super cheap. I then had a local machine shop cut some spacers so I can use...

Ya 218 and a 3 speed. I understand, but I want to swap drivetrains eventually so getting the 12k out of the way now.

Thanks for the follow up. RE moving the diff's, So new X-members and brackets like 86humv mentioned? Do the diff's need to move far enough that driveshafts need shortening?

Thanks for the speedy replies and comments. I have all the parts for the conversion otherwise so I am 90% good-to-go. Let me better explain myself on the 12k halfshaft predicament... For all the reasons mentioned (availability/price) I picked up mostly ECV axles instead of the RCSK17028-x...

Hi guys I've been lurking on the forum a while. Finally found the courage to field a couple questions. I'm rebuilding a 93 M998 and moving from a new cooling system onto 12k axles/brakes/ball joints/steering. Have a few concerns: 1) Buying axles I didn't distinguish between ECV axles (for...