Search results

I am working through the diagnostics via the TMs and the wiring diagram on a brake warning light (on after parking brake released). I could use some help understanding the function of the pressure sensor on the proportioning valve. Precursor, I had a Cadillac valve hose leak...

A bunch of questions: i need to change glow plugs. Only one is bad (hardest one under the alternator, not surprising), but cheap enough i will replace them all. 1. With the risk of breaking one on extraction and putting a chunk into the cylinder(past the pre-combustion chamber), is it worth...

Here's what I ended up using. I made the two battery cables, and removed one (part #5578874) from the original setup. Used 2.0 gauge wire (about 6 feet), purchased from a marine store. Soldered ends (4x) (marine store). 2 grommets (purchased at hardware store) fit the 2.0 gauge wire...

Can anyone help me decipher the painted over markings? Left side of tail 213RSG 728CSSB right tail 67-1

Delivery pics. Paid to get from pa to mi. The pics on the 18wheel flatbed show how delivered to me. Uhaul. It is possible. Unbolt one fender (use 4x4 to get over bolt tabs with stressing tires), then fold down the other side fender. One side fender on the trailer is normally foldable, and the...

Here’s my experience with no headlights. All other light settings worked for me except the service light setting, specifically headlights. I had power at pin F in the lamp switch (obvious since other light settings worked). I then pulled the lamp switch. I checked the switch from F to M...

I went to change the filter on my 1993 AM General M998 Humvee HMMWV. Opened pan, and filter was loose. I've done other GM transmission oil changes (4l60 I think). For them, the filter was press fit into the pump with no bolt. Looking at the bolt, (see attached pics) it appears too long. I...

Onan DN2M Diesel, 2 cylinder/4 stroke, 11.0hp @1800 RPM, 24VDC start, liquid-cooled. Got unit a few months back from Govplanet. 80 hours. Unit has high blowby, but not so high it pushes out the dipstick. I've tested the unit, and it's 100% functional, with the exception of the blowby. Starts...